Bournemouth James

I fitted a pair to my old corrado, they do need shortening, not a very hard job to fit for someone practically minded Would'nt do it again thou, cause my styling views have changed since then, and it dose require holes being drilled in the sills, which is not good If you do decide to fit some, dont buy brand new, plenty of breakers will have sets And when you fit them make sure you use undersill on the holes drilled in the sills, and coat the screws with it aswell

I also may be interested, depending on price

Have a look here: http://www.spurverbreiterung.de/frame.php?lan=uk Only problem is that there not in the uk

Black diamound will be releasing some drilled and grooved brake discs soon for the ibiza cupra r

Look shit as they are, but might look good tinted all red

That top picture looks like a different corrado to me

if you stick a piece of black tape over the abs light, it will pass the mot, mine did :)

The bearing is working, the spring and the top spring cup rotates on the bearing, but its the piston that stays still

These are vr6 top mounts, the nut does look big in the picture, it does clamp down on to the bearing only then the top plate is attached then the locking nut, i dont think im doing anything wrong here, maybe the pistons are supposed to stay still when you turn the wheel, could anyone check if the top plate connected to the top of the piston under the bonet does atually rotate when you turn the wheel, maybe its not suppose to

no, their koni coilovers

Still having problems, when i tighten the nut shown in the picture down, the piston stays still and doesent rotate with the rest of the strut when i turn the wheel Are there any parts missing?, obviously the the stop and locking nut are still to go on The piston is definately suppose to rotate with rest of the strut is'nt it?

I've been looking on some diagrams, and i think the treaded bush off of my old top mounts has been fitted instead of the later style theaded bush, that must be the problem then

Had some vr6 top mounts fitted to my car the other day, andf im not sure if they've been fitted right Is the cone shaped plate thingy under the bonnet suppose to rotate when you turn the wheel?, my old early type ones did, but these dont, is this normal?

Here's a picture of a pair of 16x8" teledials http://www.kinkymickshappywheelshack.co ... 00_jpg.jpg

I think you should go for it, they would look far better in 16", deeper dished 8" or 9"

Yeah, ive had problems with mine, quite a common fault apparentely, there are different sets available, worth asking vw or audi which set is the most reliable, then replace all of them, havent heard about using ford ones before

215/35/16s are worth thinking about also

I've heard someone mention this before, there maybe a simple way to do it, try sendind a pm to g60 renshaw

Or if you want somewhere in england, have a look here http://www.superlite-wheels.com/

It doesent look like the best workmanship i've seen, but i think it looks quite good

Not sure which turbo it is, its the 150bhb golf verison, Is the actuator the waste gate valve?

Been having a few problems with my car lately The turbo hasent been boosting properly, has a long lag, and when it does kick in, it doesent seem to pull like it should Yesterday it got worse all of a suden, soon as the turbo kicks in, it deaccelerates, and makes an awful noise, sort of like the sound you get when the exhaust is blowing I know theres a few of you that are quite clued up on 20vt engines, so any help would be great

If your still after one: I have a koni one (not sure if its the same as a fk koni one), and a spax one somewhere. Your welcome to borrow them

I test fitted one the other day, the arch will just about clear the tyre. Maybe in a year or so, ill be able to do what you a phat have done and get it done properly, but i was still pleased with the way it looks at the moment. Heres some pics:

Sounds like your trying to talk yourself into grinding the lips away on your own C. Phat got his done properly for £450, its worth it.[/quote:6ae86] Your right lee, i am planing to cut back the lips, to make clearance for the 9s i have. Would love to do what you and phat have done, and £450 is a very good deal, not sure if i would be able to get it that cheap, but even £450, i cant afford it at the moment. It is something i plan to do in the future if i go wider, so i think i'll wait till then, then they'll be able to shape the arches to the wider rims i put on the car