Bournemouth James

Yes, just matz do them and superlite wheels, and i would expect image do them aswell, there arround £120 each thou. I have some dishes that came off my zw1s, i have a pair that make the wheel 9" wide and a pair that make the wheel 9.5" wide, let me know if your interested in them.

You can get them on german ebay

£50?, they've also got 4 stud abs rings attached to them which i had to slightly modify to fit so you wont have to worry about that niether, just out of interest, did you buy your 305 brembo kit from this forum?, that could be my old kit.

These are'nt vr6 hubs, these are custom hubs, they are a direct replacement for your 4 stud hubs, they fit your 4 stud hub carriers and drive shafts, only difference is that they've got 5 holes instead of 4, i had the same set up you've mentioned on my old corrado, i had the 305 brembo kit, but had 5 stud wheels, so i bought these hubs from america and the only other thing i had to do was have the 4 stud discs drilled to 5 stud.

I have got some 5 stud conversion hubs for sale if your interested?

You'd have a job to tell just by looking at a wing, but if you had an early and a late one side by side, you can notice the difference.

Quite a rare colour that, my old 16v was that colour too, the one in my avatar.

Superlite wheels in gloucheshire, they quoted me £250 to dismantle, polish and rebuid a set of split rims, so polishing a set of one piece rims should be cheaper than that

Thanks :D 8) Its Mercedes black (040) the bodyshop showed me loads of paint chips and after an hour they all looked the same :lol: I saw a Merc on the M62 that was really shinny and the black looked really deep so i went for that. At first the bodyshop started painting it with two-pack :roll: but I wanted base coat and lacquer !!! So I made them strip it off. Luckily they had just started the roof when I noticed :lol: They still managed to screw it up and I ended up taking the car back after 19 weeks and has another shop repaint every panel except the bonnet and roof :roll: Is it the lacquer that makes it look so good do you think?, never thought any non metalic black cars had lacquer on top, i know they never did on old cars, maybe thats why alot of the black paint on modern cars look so good, been on the look out for ages now to find the perfect black to get my next corrado painted in.

Did'nt think of that one faz, did'nt know about the resistance difference with mk4, when i filled it up, i did put alot more petrol in that i normally did, so if there is an inline box somewhere, it may of done something to that due to of being much more fuel in the tank than normal.

Congratulations on the mag feature, car looks cool, love the front end. Really love that black, is it metalic?

I have some custom hubs that i bought from america that are 5 stud but will fit your 16v driveshafts,, let me know if you are interested

Needs no words

What brand tyre have you got on your 9x17's? I have the same size tyre on my 9x17's, they are dunlop sp9000's and they look mega stretched. Would like to know if theres another brand that does that size and dont look so stretched.

The front wheels are 8.5's and the et is 17, runing 215/35/17 also

It's a 20vt in a 2.0 16v shell, the et of the rear wheels is 22. I did keep it and, i relised that i was'nt gunna get the money i wanted for it as it was so i've recentely taken the wheels and the brembo set up off and put the old gear back on, and fixed a few other other problems, the car will be up for sale again soon.

Here you go!

You need to calculalate the off set and get the wheel as far inwards as possible without it hitting the trailing arm or strut, ur not gunna be able to go mega low but you can go low enough, mine is quite low and they have never rubed, even with 2 people in the back, i recon i could go lower but if i wound down the spring platforms on my konis any futher they would be touching the tyres!

They will fit fine, you will need to trim the rear arch lips back on the rear and run 225/35/17 tyres on the back and 195/40/17 tyres on the front

That corrado has had so many different looks over the years, the owner must of spend a fortune on it.

best looking: dodge viper worst looking, citroen 2cv

You could always fit 205/35/18 tyres instead to get more clearance

Just a quick question for those who have a 20vt corrado Do you use the standard corrado fuel pump, or have you fitted an uprated/different fuel pump?

The easy way to tell is, early bumpers, the swage line turns up at each end of the bumper, and the late bumper, the swage line just fades away at each end

Could these be the same ones phatvr6 has???? :idea: