delfinis38

Two that go to the cig for illumination, and ground will be right length, even two long. You will need to join a wire to go to the sender and glovebox light / batt. I guess it would be cheaper and neater to just buy the connector ends and electrical wire. I only paid a few quid for the yellow wire and connector

I also bought. 5 metres of general electrical wire. For the sender to guage.. some ring connectors for sender... I also used scotch locks to pick power and illumination up.. not the best connectors but they work. Other than that a few tie wraps and you should be sorted...

Late to the party... Plug that goes in the rear of guage is 1J0972704 000979133E is the wire set. You need 4 wires, but you can get away with 2 as they have connectors both ends. I used a duel pole sender V360023. Need to take headlight out to fit. Wiring if you want volt meter on permantly take the voltage wire to battery... otherwise link off light in glovebox. Illumination takes off cig lighter. Negative to ground of car. Pressure wire to sender... simple installation.

Sorry chris don’t do WhatsApp... will try and get some pictures up by weekend..

I’m winning it’s quite simple... just need two new plastic side plates. Thanks all for advice. What’s best to clean leather.. baby wipes. Wish I could post a picture... looked like a mouse had been eating the old foam totally fallen apart.

Still available new on German eBay.

bit slow getting motivated on this.... is it easy to split the base from the back with a heated seat loom in place.

Thanks all it’s the lower bolster drivers side outer.

So the wiki is broke, and it had a how to for the seat bolsters.... Any advice before I attempt to change a bolster...

Great news... maybe sell car first before parts....

cant beat a home recording of the top 40 on a TDK C90....

i guess you mean October not september

Thanks

Anyone bought one recently... what’s the best available part at the moment for a vr.

Good luck with your next project... if you sell your be back next year... Oooo parts... the vultures are circling.

Nothing exciting... Audi A4 sline 40

Thanks all. Great wet day to drive north to pick new car up.

What’s best for a new car these days ? Picking new car up on Wednesday. Dealer wants an eye watering 1k to coat the car...

thanks... hoping for some better luck to finish the airco...

Is this a good replacement part for the condenser https://www.autoairconparts.co.uk/universal-condenser-aftermarket-part-ssp022301.html Just sheared the lower connection off mine. Part number cross references, just wondering on quality.

Founds some nuts. So put the bumper bolts back in, to support the engine while the bumper is out

Jobs to do while the front bumper is off... I’ve changed all the air co pipes and seals... new receiver drier... condenser and compressor look okay. Any maintenance needed on the compressor apart from new belt.. Where’s the evaporator in the passenger foot well ... not looked yet. Any thing else need doing before recharge.

Will remove the front bumper at the weekend.. I've got a few thought but what's the best way to support the engine with the bumper off... need to have a good look at the weekend really.

nice to hear from you goldfinger… wow not much I can say... but hope things are getting better.... sorry for your loss....

Was that your dog bidding with a bark a5 the auction