mattkh
-
Content Count
431 -
Joined
Everything posted by mattkh
-
Hi Do you have central locking.
-
Hi Does any one have the bosch part,number for the electric auxillary water pump. Cheers.
-
Try the cold start injector.
-
Hi You are a star. Thank you so much.
-
Hi VR6 2.9 1995 I need the name and part no. please. ETKA diagram is misleading. Basically it is a black rubberry disc about 2 inches wide and has one vacuum hose going to a T, the other ends are connected to a black plastic box sitting on top of the left end of the cylinder head and the other end goes to the throttle intake pipe after the MAF. Thanks in advance
-
Help needed! Changed coolant on my C, now have fountain?!
mattkh replied to Jay2's topic in Engine Bay
Hi Do you know what coolant was in the engine before ? When it boils, are both the top and bottom rad hoses the same temperature ? -
Hi Thank you. So I will try both ways. When I hear a click, I know I have put it in the correct way. I will observe the two ends carefully for future reference.
-
Hi So what does et30 and et15 refer to ?
-
Hi Cant trust the cartridge filter in at the moment. How do I know whether I am putting the new one in the correct way Thanks in advance.
-
Hi Can you put up a picture of the starter/solenoid wires on the car.
-
Hi Check the throttle cable/switch.
-
Hi Check that you have a spark. If you have, then put new plugs and off you go.
-
many thanks guys.
-
Thanks supercharged. When the engine is off, I notice that there is a half inch gap between the circular part on the right and the belt. It is bolted on with the three bolts on the left. With three bolts holding it in place, how does the circular part rest on the belt ? Is there a hole in the bottom part of the circular bit thru which the bearing comes out when the engine is running. I cannot feel any hole there.
-
on a 2.9 vr6 with a/c
-
Hi How does the tensioner work ?
-
Hi Clean the contacts of the X-load relief relay.
-
On top of the airbox. next to the fuel pipes is 5in wide hose. take the hose off. down below will be silver plate. be very very gentle with it. make sure it is clean especially on the circumference .
-
Hi Check/clean the plate in the fuel metering thingybob
-
And where is the abs ecu.......
-
Hi Can you please enlighten on how Wurth Rost-Off Ice works and why it is best. Cheers
-
Hi I would change the fuel filter first and if the noise is still there then look out for the pump.
-
Hi The tracking is very easy to set.