Jump to content

87 Jetta 16v

Legacy Donators
  • Content Count

    588
  • Joined

Everything posted by 87 Jetta 16v

  1. Hi Karl, I do still have the head and the original invoice from GMS for the full engine. I think from memory it has done circa 50k. I hope that helps a little, N.
  2. Hi there, You could have the tunnel before the car is scrapped, yes. The only issue being that I have no power near or anywhere near the car or the garage so you would need either a generator or rechargeable grinder (if such thing exists) or a petrol version. ---------- Post added at 04:16 PM ---------- Previous post was at 04:07 PM ---------- Hi Krishen, Sorry, the fan controls were sold a fair while back. I do have the plastic strip that runs across the top of the door if that helps though. Also, with regard to the fan settings, I would think that this is due to the resistor pack in the blower motor itself rather than the heater controls themselves. I have a fully working blower if that helps? Thanks, N. ---------- Post added at 04:19 PM ---------- Previous post was at 04:16 PM ---------- Hi Matt, I didn't fit them but I had a receipt that dated them in 2010, and the mileage according to the MOT's of the car, and the odometer tied out to 5k miles. They lowered the car about 40mm from standard which takes it from a 4 x 4 ride height to a nice useable lowered stance that will still clear a speedbump. I have them listed for £75. Postage would be £9 if that helps at all? Thanks, Neal.
  3. Hi there, I totally forgot to try. I have not disposed of the car so I will have a look this week. I do have the bead that goes around it though :) I will keep you posted, Thanks, N.
  4. Hi there, The spot makes up part of the housing. You might be able to change the lens, though I am not sure, I think it is bonded in.
  5. I have one. Yours for £12 posted if that helps? Thanks, N.
  6. Just a quick update. The list at the top has been edited. Also, the car will be going to the crusher in a week or so, so if you need any body panels, shout now... Thanks, N.
  7. 87 Jetta 16v

    rear badge

    Or if the stealers want a pile, I have one you can have for £7 posted if that helps. Thanks, Neal.
  8. I have a late blower motor, working quietly on all four speeds. I would like £20 collected from Reading, or can post at cost. Thanks, Neal.
  9. Hi there, I have the indicator. Yours for £20 posted if that helps? Thanks, Neal.
  10. I have this, not sure how easilly the cover comes off the metal though? If it comes off ok hows does £25 posted sound? Thanks, Neal.
  11. Hi there, I am pretty sure I have the boot side carpets and the plastic trim. I will check and get back to you. I don't have the boot floor carpet though :( N.
  12. So, the door, there in no real rust, just a couple of small bubbles in the paint where it looks like it has been stonechipped. As you will need to paint the door this should be absolutely fine with minimal prep. The only real parking ding is on the trailing edge of the door, again, as above, if you are painting the door it will be a very simple to prep this. Let me know if that helps at all, N.
  13. Hi Mark, They do indeed include the flanges :) Paypal works well for me. I will drop you a PM with payment details. Regarding collection, I am around most of the time, and can pop out of work quickly too during the day, so pretty flexible...
  14. Hi Chris, I will take a look later and get back to you. I do have the plugs for the radio too :) Thanks, N.
  15. Hi Alex, I guess I could have it off ready for the weekend if that helps? Thanks Neal.
  16. I have one, good solid condition, no significant rot but probably a few car park dings I suspect (I will check tomorrow). Complete with glass and window regulator. Yours for £60 collected from Reading / Bracknell if that helps? Thanks, N.
  17. Hi Mark, I do indeed still have these. The bearing housings are £30 for the pair, and the window reg is the same price. Price is collected from Reading, Berkshire. I guess I could courier them if needed, that would be £10. Thanks, Neal.
  18. Hi there, I do still have it, though it is not off the car yet. The car is in Bracknell, Berkshire if that helps? Thanks, N.
  19. Hmm, I have one, but not sure of the part number. It was working when the car was retired last month. I will take a look for the PN tomorrow. Thanks, N.
  20. Shame, I have all of it other than the wings, unfortunately I am in Berkshire :(
  21. I think that could be the fan blower resistor pack, not the heater controls themselves? If yes, I have the fan blower, fully working for £20 collected, or £29 posted if that helps? Thanks, N.
×
×
  • Create New...