millerman

of course i do this but the question was asked how to get em off !! :D

:epicfail: I thought it was Mystic Meg :nuts: ha ha you know what thought thought

mystic blue being a Storm only colour,whereas Classic Green was available on the rest of the range,so its possible to even make a bottom of the range 8v in Classic green with the Beige Leather option into a Storm look-a-like just add colour coded grille(easy DIY) Sony CD player BBS Solitude alloys(v rare in 4 stud admittedly) 2xStorm badges and you have a look-alike :roll: I prefer the later interior as it just looks more modern and classier whereas the early interior looks more 80's Hey Rodders I knew you would be along sooner or later with your Storm input :lol: I think the earlier dash does look quite retro i thought it was dragon green not classic green !

apart from the wheels and a couple of badges and colour what did the storms have extra ???

yes if its not rusted on which it will be spray it with wd40 and wrench it off with a flat head screwdriver :D

i run a shipping company in heathrow and would be happy to help with any shipping you may have give me a shout send me a pm and i will happily get you a price and we are better priced than interparcel and the suchlike kel

lol did you seriously do this, lol. least you know next time not to take out your starter motor to replace the alternator 8)[/quote:2g6hc6ik] lol brain storm !!

should be able to get a cable from ebay and download the software from rosstech and away you go :D

915 is better than 476 for lustre but not as durable as 476 and zaino z2 zfx'd lasts ages as said and is normally what i use as it lasts so long but you could also put a nice coat of 915 over it for real sparkle :D

colinite 476 is very good and lasts a long time or zaino z2 (3 x coats) is also very good

you all are aware that claying will only remove contaninates that normal washing wont ok it leaves your paint feeling silky smooth but once you have clayed you need to polish and then wax. claying can induce maring which can look like pretty cack so make sure you polish afterwards then on to wax or you may not get the best results :D

nice rims you got there :D

can you use an m8 by 75mm bolt or does it have to be 80mm ?????

glad you got it sorted :D

yes but you need a courser grade of clay and over spray will come off

cheers guys :D well again not today but fitted my stainless decat pipe yesterday just gotta get some zorst paste to stop a little blow on the joint and will do some pics but tested it and it pulls far better :D

wise words gotta do my belt this week end might as well do the power sterring pump fulid too !! :D

so what was up with it ben ??? nothing bad i hope

if it was brown when it came out i would empty it first and then refill as it should be red (depending on what brand you buy)

fill it back up with fluid !! the Reservoir is located next to the battery and run the engine and turn the steering lock to lock a few times to bleed the rack should be ok then :D

100% coil pack is your problem easyest way to check is mist some water over it via a spray bottle if it arks and make the engine run poorly theres your problem however some have fixed by putting new epoxy resin on em but i think this is a temp fix

well not today as the weather has been cack but on sunday i fitted my goodridge hoses to my front 312's and rears bleed the brakes have a better peddel feel and last thursday i fitted my new eyebrow and grill colourcoded as well ,of which i painted myself and was quite happy with the result i also fitted my new isotta steering wheel (well ebay new) :D

paints4u.co.uk are very good

you need a wind back tool

i have these wheels and i was not sure but i guess the bolts come out and what did you use to replace them with ??? and also what hub caps are you using as i cant seem to find a suitable bbs cap ????