Dude VR6

I'd be up for a green one to, with red/blue temp dial.

Has any one got the part number for this cup holder ?

I brought some Rayon Cloth Wiring Tape off eBay, at £8.99 a roll. But it looks good once you rewrap your loom, just like new. Just type rayon tape into the search. ---------- Post added at 02:16 PM ---------- Previous post was at 02:12 PM ---------- I brought some Rayon Cloth Wiring Tape off eBay, at £8.99 a roll. But it looks good once you rewrap your loom, just like new. Just type rayon tape into the search. Or you could get it from Vehicle Wiring Products. http://www.vehicle-wiring-products.eu/VWP-onlinestore/sleeving/tape.php

Dg ?

Mine turned up today, I've had a quick look through it but am saving it for bed time reading. Night all I'm off to bed :) Jim as always, a sterling effort, well done :)

I build race cars for a living, have been for over 15 years now, and every car I've built has a roll bar, or sway bar. So wouldn't recommend removing yours, just try and find another way to connect it.

Best take a trip over the pond, and bring you tape measure with you. Everyone over here is crying out for one of you trim panels.

Dave The postman has just delivered mine this morning, they look the Dogs under carriage. I may go and fit them this afternoon. Cheers for this Dave, again a very nice product.

where did you get them from ?

Loving the pictures. BBS CH 17x8 by any chance ? I was looking for a set of these but couldn`t find any where to buy the from, so settled on a set of the Compomotives. 2 lovely car`s both with some of the best examples of wheels that suit a Corrado.

Check out you tube, a guy on there did it with a baseball bat ---------- Post added at 05:55 PM ---------- Previous post was at 05:46 PM ---------- Did you have to remove the wheel arch liners before they did any rolliing

Stu I brought one from vw 3 weeks ago for £27, still available

Andy, you lost me at "yeah, quite". Well done mate, my life line has returned.

Right, Ive been shopping at my local dealers, so have some prices to update on here. V535 807 181 front splitter reinforcement £27.81 V021 133 073 C throttle body gasket VR6 £4.92 V021 133 917 HT front lead holder VR6 £13.22 V021 133 824 cable holder/manifold VR6 £4.96 N101 473 01 nut holder front splitter £0.62 N015 946 1 screw for front splitter £0.24 N904 338 01 bolt for front splitter £2.11 535 121 101 L top hose VR6 £93.47 1H0121157H water hose / (throttle valve housing > heat exchanger>cylinder head) £40.81 G12 ++ £7.45 All prices are plus VAT and what ever you get off from your friendly parts man, or is that just me ? Ill update when I buy more stuff from VW

Dave I'll have a set please, but I think you already knew that I wanted a set, pm me payment details and I'll get that sorted. Cheers

Dave put me down for one if you do, and do you still do the rad brackets ? I'll have a set of them to if you do.

As the title said, I'm after a 312mm fitting kit for my VR6. I've got the calipers, carriers, hoses, and disc/pads are on there way. The only thing I need now is the fitting kit/spacers, ideally I'd like one like DG Autotech did, which they no longer do. I've got cash waiting, and parts ready to fit, please help. ;-)

There's a few on eBay quite cheap

Were can I get a can of worms ?

If you find out any more about these filter, please post up as I'd be up for getting one. Stop all the bits from the trees coming up through the blowers

I'm liking those Porsche alloys :)

Fire the car up and let is come up to temp, and wait for the fans to kick in. Have a look around the area and see if you can see any thing, it maybe the hose has a small hole in it.

I got some from here http://www.priracing.com/section.php/83/1/wheel-bolts/a1747de7d00e0aa71040a0c42c033079

I'll be going again, was there last year and it was a top show, some very nice cars

So do I sell my compomotives, And by a set of these, or do I just stick to what I've got.