-
Content Count
241 -
Joined
Content Type
Profiles
Forums
Blogs
Calendar
Articles
Gallery
Downloads
Store
Everything posted by Rinse
-
As apposed to the positive things people say on that forum?
-
Got the job!! Its definitely a sign for my 5th C haha. 20vt conversion time!
-
Interview went really well, but I've just found out another branch a friend works at are hiring someone in parts, so put my CV across to him too haha. I don't want to be fussy about jobs though so I would take either.
-
I've got a Job interview with Arnold Clark today so I went onto their website to do a bit of digging. I then noticed a cheeky Corrado sneaking about in the Service section. I know there was an old Corrado's on TV and stuff thread but thought this might be a new one! http://www.arnoldclark.com/servicing/extended-opening-hours/ God damn I want another Corrado :(
-
So... I've been a bit silly. Turns out it was a fuse. Didn't think they'd be separate from Dipped etc. Ah well, least theres an answer on the forum now.
-
Swapped out headlight switch, clocks, and indicator/wiper stalks. Exactly the same issue. - no headlights on NS AND the main beam light doesn't come on. Any ideas?
-
Who delivered the package? I know theres quite a few Carriers who are permitted to leave packages with neighbours. I work for Amazon too, so in this situation its more than likely that the Driver who delivered is going to have to come back and collect the package. I wouldn't get your hopes up on keeping it either, your address and name will be on the tracking for where it was delivered. Could be a case of the previous occupant sending their TV for their new address to their old address though haha.
-
Was a bit worried the Inpro's were knackered there! haha. Hope you get a fix sorted for the HID's with them!
-
I've searched and found threads where people had the same issue but there was no fix in them. Basically, I've got an uncut headlight loom And my lights work as they should, Side lights, both lamps. Dipped beam, both lamps. Then if I put on main beam only my Off Side comes on, and my near side is just side lights. Checked with a spare bulb and same result. Followed the wiring through the engine bay and appears to be okay. Also, when I flash and go into main beam, the blue light on my clocks doesn't come on. Not sure this is coincidence or part of the fault? I can get a hold of spare headlight switch, clocks and indicator stalks. Would this fault come down to these parts though? I also have an uprated loom sitting here I can fit, but as the headlights are pretty bright as they are I'd hate to cut up the original wiring. Whats your guys thoughts? Cheers!
-
Currently at the car so can collect and post bits on Monday. People showing interest in items have been PM'ed.
-
If I was keeping my VR I'd bite your hand off for this.
-
Added door pods, mirror switch and sunroof.
-
Bristolbaron's BBM Charged G60 : Leaving so soon?!
Rinse replied to bristolbaron's topic in Members Gallery
Looking amazing now mate! Wish I got a hold of it though ;) haha. Still enjoying the VR though. -
Yeah, NS wing is there. Theres a bit or rust on OS, will get NS checked. will be a bit of a headache to post but sure we can sort something if its not crusty!
-
Yep, The dials? £25? ---------- Post added at 1:28 PM ---------- Previous post was at 1:26 PM ---------- I will PM people with PayPal details once I can confirm when I can have items posted. Looks like it will be Thursday for Edinburgh items.
-
If it costs under a 10er to post, then I'll do them posted at 80. Replied Think that will be going with the engine etc mate.
-
Yeah Interior light is still there. I'm unsure if both lamps work but I'll get my mate to check them. Plastic ones are there, the rubber ones are perished. I can have them removed for you and have barny (My mate who's storing the car and helping break) meet you with them? Eyebrow spoiler is in Edinburgh, Dalry, Can get that whenever you want Yep clocks are all working as they should. Showing at roughly 145k - I can try and get mileage confirmed on them as we gotta put em back on to get proof of engine running. Chrome inpro's. I can get pictures cleaned up and off the car over the next couple days as they're on my VR in Edinburgh.
-
All panels are Aqua blue metallic unless stated Rear spoiler: £15 Clocks (showing around 146k?) - 25 Switches from dash (rear screen, front and rear fogs, headlights) : £10 -Prov sold: dumptyboy Inpro Headlights- £80 - SOLD: jimbob88 Front bumper: £30 Sunroof (Panel only) - £10 Eyebrow spoiler: Free - painted by hand in blackberry. - GONE - ray_vr6 16v calipers and carriers: 10 quid. Rear lights: £30 (I can tint to all red rears for a cost) Petrol cap: £10 Grey Dash - £30 Grey Glovebox - £10 16v radiator: £40 Late speaker pods, £20 plus postage. Late window switches, £15 for pair. Mirror switch £10 Grab handles £10 plus postage. Fully working sunroof was going to be putting into my VR but seems unlikely now. Offers? Various other parts available. Have a 2.0 16v 9a engine and gearbox also but potentially sold. Parts are located in Inverness and Edinburgh, can post/deliver within reason. Ask for pics and I will obtain them. Thanks.
-
Will 4Motion Tensioner Fit a VR6? Update... Answer: NO!
Rinse replied to Rinse's topic in Engine Bay
I've got one lined up for a 10er just 40 miles away, thanks for the offer though. -
Will 4Motion Tensioner Fit a VR6? Update... Answer: NO!
Rinse replied to Rinse's topic in Engine Bay
Came straight off after starting it up. Bollocks. -
Will 4Motion Tensioner Fit a VR6? Update... Answer: NO!
Rinse replied to Rinse's topic in Engine Bay
4mo is 6 rib as Kev said. Won't fit that runner. -
Will 4Motion Tensioner Fit a VR6? Update... Answer: NO!
Rinse replied to Rinse's topic in Engine Bay
Ah yes! This will work for getting the new belt on! Cheers guys. Just gotta have my dinner and i'll fire it over. Cheers! ---------- Post added at 9:36 PM ---------- Previous post was at 8:35 PM ---------- Sooo.... Update. It will fit. but since the VR6 has a smaller sized pulley the tensioner tops out before the belt is fully tightened. If you were to run this you need a shorter belt. Its tightish but theres a bit of slack.. Will this be safe to drive. just with a bit of squealing from the power steering? - Just I need to drive home tomorrow (to inverness 100 miles there and back...) -
Will 4Motion Tensioner Fit a VR6? Update... Answer: NO!
Rinse replied to Rinse's topic in Engine Bay
Trust me I have alot of bad language. haha. Cool I'll give this a shot before I take a stanley to it or pull out the 3 bolts. -
Will 4Motion Tensioner Fit a VR6? Update... Answer: NO!
Rinse replied to Rinse's topic in Engine Bay
Ah, that will be the difference then, I'll crack off the pully and hopefully they will swap over. Yep I was considering just taking a stanley to it and hiding behind the wing haha. Will give this a blast tonight and hopefully it won't be too much of a headache.