Dox
-
Content Count
5,332 -
Joined
-
Last visited
-
Days Won
28
Everything posted by Dox
-
This should be a lesson to us all to carry a 10mm spanner adjacent to the battery earth connection
-
I used one as a daily, but car shared for work, they didn't share my enthusiasm - especially those in the back. The compromise is to use in the warmer weather, garage over winter and buy something to get you through the worst of the weather.
-
Group buy maybe?
-
How will you inflate your tyres if / when / as needed? Air lines / compressors aren't always accessible.
-
Could it be the X denotes exchange and the TR denotes it was a TRW unit that’s now been rebuilt by a third party?
-
There are some who've fitted MK4 golf pumps and been OK even though they are reputed to run higher pressures. MK4 Golf V5 starters have also been fitted and give a better cranking speed
-
Bank60 today til Monday
-
PMd
-
Payment received, thank you. I'll pm a tracking number once shipped
-
The final set provisionally sold complete with discs and pads
-
One pair left now Paceo, they're on offer to a wanted ad on ukpassats and listed on ebay too
-
Carriers only? I presume you already have 288mm conversion? Standard 280mm calipers wont fit with either 288 or 312mm discs.
-
I have 2 pairs left and 2 interested parties both who I've already told £38 is the lowest (the £8 is posted signed for to your door).
-
Wkd58
-
You need to seal off the bulkhead to prevent water ingress into the cabin, so a piece of plate the same thickness as the difference in length on the rod, 3 holes to suit the master and longer bolts? Or are they studs on the master itself?
-
Can you not just fit a packing piece between the master and bulkhead to drop the pedal to a sensible level?
-
W60% off today only wed60
-
You need to use a DTI on the disks to check the run out
-
Works for me, GLWS
-
Link doesn’t work for me?
-
If you suspect a misfire, with the engine running disconnect and reconnect each plug lead in turn, make a note any removed where the engine note doesn't change as theres a problem with that cylinder. I'd do it at the coil using insulated pliers
-
You'll get a crank sensor code on these engines if its not running at the time of the scan.
-
I've no idea, I don't work for them I just get emails with the codes weekly If you register your email with them they'll send the codes directly to you.
-
Carriers only, £38 posted, £30 collected.
-
Wkd57 today until sunday