ben16v
-
Content Count
2,355 -
Joined
-
Last visited
Everything posted by ben16v
-
welcome isnt it funny how many rapid responses a female corrado owner gets :lol:
-
you might find that 195/50 r15 are cheaper and fit the sebrings ok AFAIK look at toyos, GSD3, yoko A539 i think ben
-
http://www.mytyres.co.uk what size etc will help
-
do ya tghink the corrado will be in there??? prob some cool other ones if not though!!!
-
get all the pro races done and then use your M3 GTR to do the el capitan endurance (in B-Spec) to get the toyota MINOLTA race car!!!!!!!!!! about 1150bhp +nos and brakes and handling to boot done 30% so far cant wait till i`m off on thursday!!!
-
to within 10metres IIRC
-
Thats your oil pressure switch, the colour denotes the pressure range (it does say in tiny writing on the switch) IIRC 1.8-2.0 BAR for the white one there are two types: normally open and normally closed you have to be careful that you get the right one, by using a multi meter on it to see or else you`ll get the buzzer and light as soon as you go over 2000RPM for fitting, unclip the lead and use 19mm spanner i think
-
mines the same size as kev`s ....ooer!!! but i fitted mine lower down, behind the bumper on the bit that goes rusty (if you know what i mean?) temps are between 94 whilst moving and 108 when stationary, my car did used torun VERY hot (>128)until i fitted this!
-
its been there for months,. dunno why tho??
-
golf 2 and passat 3 are the haynes` you need IIRC
-
stick the k&n in and remove the snorkle in the front of your air box, i dont think you`ll notice much of a difference apart from maybe little sharper response, an induction type noise and it`ll sound a bit faster if you get what i mean do a search for drilled airbox too that`ll turn up some reading for you HTH ben
-
so its not on a plunger type affair like the bonnet (or am ithinking mk2 golf..)
-
my alarm is on my boot light for the boot open sensor, is there another switch i could put the wire to and disconnect the boot light?? (dunno if it stays on but does loose charge after a couple of days)
-
dont see anything mate
-
i`ve just purchased a dual microwave sensor for my toad alarm, just wondering if anyone had any ideas on fitting? i think it goes under the handbrake cover and then just wires upto the alarm??! any ideas on if i need to reset the alarm after for it to recognise it?? any input much appreciated cheers ben
-
thanks to phaserno1 for my sensor as above!
-
What is your 16v spec & how much power does it produce?
ben16v replied to corradophil's topic in Engine Bay
my (dubious) RR results: 157.4hp @134mph/6507rpm 135lbs/ft @5424rpm -
i fitted my mocal on my 16v with no bother really, did have it up on ramps to make it easier but still was ok job. (put mine behind my bumper just down and in front of the rad if anyone`s interested)
-
low tyre pressure out of tracking or camber they`d be my first guess
-
cool as! whats his real car like????? (metro?)
-
mine passed today aswell!!! "gonna need a new brake line before long!" is all i got! so (sorry to steal the thread) Goodrich?? how much, who, where and how hard to fit? thanx ben
-
VR6 i just did mine with a marker pen to see what it would be like, look fine to me
-
theres loads of threads on this but dunno where either! :oops: iirc around 90 is norm, 70 is a bit low my 1.8 16v sits at around 80-90 water and 94-104 oil once warmed up
-
a mate of mine in an old 8v golf got stuck on the way to france a couple of years ago, think he got the passengers to sit in the boot to get clear
-
dig, they came on all corrado`s