MaverickG60

Anyone got anything they fancy doing a swap deal on?

# Cheers for your replymate. No need to go back to the fuse box, I intend to splice the original connectors to the original loom near the rear lights anyway, so 20cm approx of cable length will be spot on. ---------- Post added at 1:11 AM ---------- Previous post was at 12:01 AM ---------- Could I take the glove box and gearstick please mate? If you quote me a price for them and the rear light wiring that would be great, cheers.

Hi, going to sound a strange request but here goes... I need the rear lighting loom. Basically my car has some nasty crystal LED ones fitted and they've spliced the bulb holders etc to the original car loom and now the original electrical connectors are missing. If possible are you able to trace the looms back approx 20cm or so and cut them off so I'm left with the original electrical connector and approx 20cm of cable please? I need this doing for ALL the lights inc the ones on the tailgate. Many thanks.

Porsche Cup wheels finished in KTM orange complete with genuine Porsche center caps. There's not a single scuff or scratch mark on these, they are in excellent condition. Wheel size is 16'' all round however the rears are slightly wider as there off a Porsche. Front wheels are ET55 7j and rear wheels are ET70 9j. Due to the G23 spacers that come complete with these wheels your able to use the genuine Porsche wheel bolts, which are hard to source these days, and I have all 25. Front wheel spacers are 25mm and rear 35mm, the spacers come complete with bolts that offer up to your wheel hub (4x100) which then allow you to bolt the Porsche wheels too. Wheels are fully weighted and balanced ready to go! Car compatibility is anything with a 4x100 stud pattern. Tyres; Front wheels run Michelin Pilot's and have approx 8mm of tread (195/45/16) Rear wheels run Goodyear Eagle F1's and have approx 7mm of tread (205/50/16) I'm open to swaps plus cash or just swaps on wheels of similar value. Ideal wheels would be some 16'' BBS splits, good condition of course, tyres not essential but would be an advantage. I'd prefer the buyer to arrange there own courier service for collection. I'm happy to deliver the wheels within a 50 mile radius all I ask is you cover my diesel or I'm happy for the buyer to collect in person. Price - £750 Any questions please feel free to contact me on 078255 61006.

After a G60 cam belt cover please, good condition. Cash waiting. Thanks.

Thanks for the reply, would you take £35 for it? Cheers.

Hi, do you have the throttle body still? If so how much please, cheers.

Hi, do you have the throttle body still? If so how much please, cheers.

Hi, do you have the throttle body still? If so how much please, cheers.

Hi, do you have the throttle body still? If so how much, cheers.

Hi chaps, As in the title, looking for a good condition VR throttle body. Cheers.

Hi guys, I'm after a G60 rad in good condition. Thanks.

Ha! Just realised!!! Well I'm sure someone will pay it, but not me. £1200 is a lot of anybody's money! Thanks again... Rob.

Thanks Paul for the find but that's comedy money in my opinion, they are without doubt a lovely wheel but too much! I may have to re-evaluate my wheel choice as I didn't want to spend more than £800. Thanks again, much appreciated.

Cheers for that mate, awesome little tool! Well I can only go off advice from those that have the experience and seen as have none when it comes to wheels I have to take it, so if your saying 9j is the max you could run on a Corrado without massively butchering the arches then that's fine. Are there many different adaptors you can use to change from 4x100? I've found a few options on venom motorsport 5x100 and 5x130. Are BM wheels doable on a Corrado?

Thanks for your reply mate, it's really frustrating as I can't find any Futura's anywhere, the best I can do is http://www.pistonheads.com/sales/3887896.htm - 9.5j rears!!! Are they that rare??

Yeah figured that sort of price. I find it some what hilarious that 10J rears are substantially cheaper just because they have no application on VAG cars, massive scene tax! Found only 1 set in my quest, eBay, 8.5J front & 10J rear off a Porsche. Seems they're thin on the ground not unless I'm not looking in the right places? Tried eBay.de no luck, either 18 or 19'' and all have 10J rears. When you say 10J's won't fit, why exactly? Is it just clearance issues? Please excuse the obvious questions but wheels has always been something I've never really bothered with up until now, so just getting my head around the whole concept...

Look mint mate, really set the car off nice! I'll keep an eye out then. I suppose more VAG friendly sizes will be comedy money?

Ok cheers mate. Shame, really nice wheel.

Just after a little advice really, I've seen some OZ Futura's that were originally off a Porsche 968. They're 5/130 which is easy to fit to a 4/100 stud pattern by using adaptors, my question is would the wheels fit with ET's of front 56 and 8.5J and rear 61 and 10J? Any advice would be greatly received as this is the first set of porker wheels I've looked at. Thanks.

Just wondered if anyone knew of any VAG door handles that would fit the Corrado with minimal hacking and bashing? I've read some stuff about the Porsche 944 handles but they seem to suit the Golf's better it would seem? Failing this I had thought about wrapping them in carbon? Cheers.

PM'd regarding rear strut brace.

All sourced now. Thanks everyone for your responses.

voo51 - Got your email, thanks. Just waiting a response and hopefully we can work something out. Cheers.

Thanks for posting the pics. I assume the pics you posted were of the drivers side fog? If so, then I'll take it at 25 pound delivered. PM me your paypal and I'll get the money transferred to you mid week. Cheers.