mr lobitos

thanks again dragon green , will get one on order "a" pillar trims ,anybody ? just another question, getting terrible wind noise , any ideas (sensible answers please), cheers

drivers side , are they easy to fit, so pathetic but so annoying, cheers

couple more bits needed 2x "A" pillar trims ( if there the ones that run down the windscreen) in black with no holes plus can you still get the clip that makes the rod attached to the doorpin go up and down (hope you understand my description) thanks for looking

i can do the 11th, will be go to meet with a few of you after missing all the other meets due to work, anybody need any tyres probably be able to fit 4 in ?

i'm thinking because side rubstrips have been removed and doorhandles coded , there's not much black on the car, would just like some pics to set my mind at rest, thanks for the input

don't worry about postage, got your address somewhere ,will post asap. just want some pics of a painted one now

have been given a 90mm front splitter in good condition , just a couple of small cracks which i've repaired following the guide on here. my question is has anyone colour coded theirs if so any pics? plus anyone want a 50mm splitter foc (just make a donation to the forum on my behalf) thanks for looking

croeso, (that will get a few scratching heads), good to have another welshy on the forum, where abouts are you from ? looks like your getting your teeth stuck in judging by your other thread ,just remember " a corrado is for life not just for christmas" thats my motto. they can drive you to distraction but in the end there worth it. also a friend of mine is breaking a g60 , if you need anything give us a shout, all the best

can't believe i've not got round to getting these ,two please cheers

baffled as to how to get cold air feed to bmc , people have suggested relocating battery to boot to free up space, this is now next job on list. peebee kindly posted pics of his battery postion in the boot but swiftkid mentioned kev had relocated his battery under the rear armrest. like this idea for discreetness tried searching for " kev " but there are quite a few on here , will " kev" with the battery under the rear armrest let himself be known as i'd like to see pics if poss, cheers

thanks for taking time out to post them pics, peebee. swiftkid mentioned kev had relocated under rear armrest, whos kev ? would like to find pics of this before i decide which direction to go, cheers

if you don't mind that would be great also what work is involved, cheers

thanks for comments, police around here are more interested in you being one or two miles over the limit have proper plates in boot just in case, peebee where would your engine bay pics be , cheers

good thinking would certainly free up a lot of space, what work is involved it that, thanks

been hard at work on the old girl today (not the wife), she's been out with the girls today so had some me time on the corrado, and god have i enjoyed it, firstly sorted out most of loose ends under the bonnet took out battery, wrapped all the wiring with fresh new binding, the give it a good clean, then gave the inner legs a good clean , refitted battery with new wrap around jacket for the winter (pinched off a subaru ) plus battery cover (thanks osv for part no. does look a lot smarter) made bracket to keep washer reservoir secure after relocating for bmc,still can't work out were to get cold air feed to it, any ideas. engine bay nice and clean now Uploaded with ImageShack.us next inside,finally sorted out tunes fitted kenwood multichanger , new hertz door speakers and tweeters (in the doorcards) and replaced orginal dash tweeters with jbl speakers , i don't listen to music loud just like a nice clear ,crisp sound and this set up is just right then fitted glove box supplied by matt 8v , what a job finally, replaced all of the missing trim clips ( thanks dragon green for parts no.) VERY SATISFYING DAY Uploaded with ImageShack.us Uploaded with ImageShack.us

parts ordered, confused were no6 clip goes can only see 5 holders, also anybody got the black clips that go around top of rear seat belt thanks again dragon green

yes ,it is in first, so thats that sorted any ideas on the flickering oil light, thanks

firstly, car is running sweet (touch wood) only thing is on longer journeys when car reaches normal running temp when you slow down and stop at lights for example the oil pressure light flickers , plus when driving slow at low revs car can be jerky (not beef) is this to do with the drive by wire , any ideas cheers

another couple of bits of plastic needed 2x black clips which go around seatbelt on top of rear doorcards plus does anyone know part no. for the 10 x black plastic clips that hold rear door cards in place mine only has 2 on each side cheers

supercharger,arbs and a tank full of super to enjoy it ( second thoughts a tank full of super will probably cost £3k soon)

just a few pics to update whats work been done over last few weeks,now for engine (bay Uploaded with ImageShack.us Uploaded with ImageShack.us Uploaded with ImageShack.us Uploaded with ImageShack.us

same as jim, for me

sorry to bother, have stripped out headlining to fit passat moonroof tomorrow, question is after reading through quite a few posts , there is a few mentions of fitting washers for spacing so roof sits properly , is this correct and if so how many and on which bolts, advice needed

did rear passat doorhandle mod few days ago, been working great till this morning, drivers door just won't unlock and open, passenger side working great, opening and locking prefect, help please

totally agree with peebee,was disappointed with 24v roar even with bmc fitted, but at full chat with miltek fitted, lovely