sexybourbon

Link don't work bud

Mm not sure about the boy slave , you got a missus ?? Haha Mine are subaru wheels mate and they are modified slightly so that the center bores are 1mm bigger and they run 20 mm spacer all round to get them to sit where i wanted them Subaru is 56.1 cb Vw is 57.1 cb Stud pattern is the same though

Ohh sorry forgot to add its dragon green not common green ;) !! Woops i mean classic green :)

Maff sorry mate but not selling inless you have something really nice to offer, told myself i would never sell these When i re sprayed them they was supposed to be bronze but came out gold , they will be silver next time round Good luck trying to find them , iv trauled the web and cant find another set , i only paid 120 quid for the ones on mine haha !! Bargain

[ATTACH]77775[/ATTACH] [ATTACH]77776[/ATTACH] Haha good luck , iv had these on the car for about two years , never seen another set since

As title really , want the crown wheel and pinion and any other parts needed for the conversion , money waiting for the right bits cheers

Very very nice that will br one sick puppy on the road if i wer you id be jumping at the bit to drive it by now haha

You planning on making it to national day mate ? Hope all goes well mate bet you enjoy the brakes just as much as the power lol

Cheers fuzz its nice to have it al back in and its nice and quiet Fla ill have a look and post them in here if iv got any , i did the door triangles aswell im sure i put pics of them up already I got the materiel from dunelm but you can get it of evay and its bit expensive , i got half a mtr by the width if the roll (1500mm ) for about six quid !

Cheers fla yea its in alcantara , iv done the door pulls aswell and the rings around the door levers , the sunroof cover and the seat rail covers in the back Dont use the spray glue , go online or to a local car parts supplier and biy the evostick stuff but only buy the brush on stuff , i laid the fabric out and the piece i wanted to trim and then brushed the glue on both pieces , then left for a min and then placed the part on the fabric and then ribbed it down , leave enough to pul the corners though ! I had to do a few bits twice as i couldnt get rid of a few creases on the corners , look back a few pages and there is a few pics of it off the car and i think of the stuff i used Cheers mic will catch up on national cheers for the help with the clocks

Wich ones mic the fuel and temp ones ? , i thought id fudged them up but turned out i was really low on petrol so thats why the guage didnt move :)) haha !! My water temps was working but seem to have gone a bit dikky so need to take a look at that but i have a sneek suspicion its the plug thats come of the sensor in the engine bay as its had a full new thermo housing stat and blue tep senso a couple of months ago

Final thing i did on the interior was take the clocks out and change all the filters for clear red acetate , it looks so much better and on a night makes the cabin feel like a great place to be , also changed the stereo to match it so iv now got a bit of a green and red thing going on Ohh changed the lights in the overhead bit for festoon led lights as well and they make the cabing feel alot newer aswell. , no more dull yellow lights [ATTACH]77647[/ATTACH] [ATTACH]77648[/ATTACH] [ATTACH]77649[/ATTACH] [ATTACH]77650[/ATTACH] [ATTACH]77651[/ATTACH] [ATTACH]77652[/ATTACH] Its hard to get any kind of good photo of ot all black in there and any light that dows go in just makes the pics look worse , looks great in the flesh though im chuffed with it al

Chris , its staying orange lol Right finally finished the interior , gave it a good clean and hoover and used poor boys natural dressing for the finish When i had the car back together i realised one of the rear speaker didnt work so iv had the head unti out and ran some new cables to the back so i have soud at all four corners now After looking at david warts thread on here i followed his advice and went about fixig the snapped directional on the heater panel , people want daft money for these usually so i too it out and fixed it [ATTACH]77644[/ATTACH] Basicaly the bottom cog is kept in place with a plastic lug and its this that snaped Do i took a bolt were tue last inch of the shaft is bare and cut it to the lenght needed to reach through the back of the unit and in to the cog to locate it propery again [ATTACH]77645[/ATTACH] Filed a little wedge in to it so it was the same as the snapped part thats by the side of it Then drilled the hole out to the same diamiter as the bolt and aroldited it in place and left it for about six hours Put it back in and spent about an hour just turning it and spraying wd40 on the bowden cables until it started to get in to the cables and lubricate thurther down them and this eased the force needed to turn the directional , id also reccomed turning the fan to 0 before trying to move the directiona as it just makes it alot harder to turn [ATTACH]77646[/ATTACH] Heres another pic of the part that breaks

Show off ! Only kidding I'm very jealous of that , nice choice though it is stunning

Just read through this what a car , you have some skills there mate well done hope to see this at national day good luck with it

Lilfuzzer has a moon light blue vr , think its tidy aswell good body work standard engine and wheels and black leather id give him a pm mate I think it is true , everyone returns

[ATTACH]77593[/ATTACH] Should be fine

Good idea can I have my car as the forum banner pretty please

Looking good mate

Welcome mate lets have some pics

Good news james thanks for ordering them. Will be much more of a complete unit with the extra plugs , ill keep my eye out for these popping up soon then Thanks again for getting back to us bud

Bump to help a few people out , would like to know if its possible ??

Read about that mark wasnt it part fault of bruntingtorpe for not filling the safety barriers up with water / sand ?? Was a nasty accident that

Nope but i will cheers for the heads up

Just put of curiosity how much weight would be saved if you wer to have bonnet roof wings and tailgate ? Brilliant product awsell mate hats off to you