swampy
Banned Users-
Content Count
324 -
Joined
Content Type
Profiles
Forums
Blogs
Calendar
Articles
Gallery
Downloads
Store
Everything posted by swampy
-
having read many threads on here about people changing the inlet manifold and having trouble with the old bolts i have done my research and can now offer them. i know these fit the above car, am sure they will also fit many other years . anyway all of the bolts will be stainless steel so can be polished up to a mirror like finish in the set you will get qty four bolts from tb to manifold qty 9 bolts to connect the two halfs of the manifold qty 9 bolts to connect the lower part to the cylinder head 22 washers £10 the set delivered
-
All orderd up and being made
-
I was always led to believe that both sides should be adjusted by the same anount
-
after several enquiries about these and then a few sold and fitted i can now offer these to you stainless steel braided hose mild steel ends direct replacment £30 delivered is the actual item supplied
-
Yes afaik though I'm a novice on vw
-
I wouldn't use stainless bolts, far better off with 12.9 grade bolts which are a lot stronger Again I can supply these along with the conversion hose
-
I got a set from machine Mart, has a holder in it that fits the 3/8 ratchet and then loads of different Allen key and torx ends you can swap over
-
Thinking of buying an MG TF 160, anyone had one ?
swampy replied to daleyboy's topic in General Car Chat
They have. Well they did when they a derivative of the engine in to the free lander,they fitted spray bars to the cylinder a fairly easy mod that can be retro fitted so I am told -
If possible try warming the engine up, I e running it for a while As a side note what length are the bolts? I suspect I could supply some nice shiny stainless bolts to replace it with
-
Thinking of buying an MG TF 160, anyone had one ?
swampy replied to daleyboy's topic in General Car Chat
If you get one fit the oil spray bars from a land rover discovery it helps prevent the hg going and so I'm told Is an easy modification to do -
Can supply all specs of BRAKELINES for most of the Audi vag range plus most other makes Can now also a braided clutch line for £30 deliverd
-
Yes mate can do most cars They can contact me via PayPal address which is also my email
-
Not a problem!! Have come across that problem many times, people think because you fit calipers from x car that you need to fit the lines from the same car. When Infact you more than likely require custom / bespoke made to order items like I supply
-
They do them on the deli counter in waitross
-
Yes they are Morrisons do one with quail egg in the middle that's really nice
-
Still no payment despite being online First person to send funds over gets them
-
No longer available new Last available set I got and exported to new zealand
-
Sold pending payment being recived
-
here we have a set of brand new rear braided brake lines supplied to me in error as part of a set £30 delivered which is a bargain
-
Pooh that's not good When I worked for jaguar / landrover we lost a brand new RR sport due to mice, it had being sat at a storage compound awaiting sake, little rodents got in, destroyed the insides of all the seats and the loom. Was more econimacal to use its as a parts car than it was to repair!!!
-
Yes I am Or on eBay 9657adriana is the user name Cheers
-
Afaik they are 1mm though they could use both,
-
Yes the fronts are an m10 x 1 thread you want a length from bottom of head to tip of bolt of around 22mm