swampy

having read many threads on here about people changing the inlet manifold and having trouble with the old bolts i have done my research and can now offer them. i know these fit the above car, am sure they will also fit many other years . anyway all of the bolts will be stainless steel so can be polished up to a mirror like finish in the set you will get qty four bolts from tb to manifold qty 9 bolts to connect the two halfs of the manifold qty 9 bolts to connect the lower part to the cylinder head 22 washers £10 the set delivered

All orderd up and being made

I was always led to believe that both sides should be adjusted by the same anount

after several enquiries about these and then a few sold and fitted i can now offer these to you stainless steel braided hose mild steel ends direct replacment £30 delivered is the actual item supplied

Yes afaik though I'm a novice on vw

I wouldn't use stainless bolts, far better off with 12.9 grade bolts which are a lot stronger Again I can supply these along with the conversion hose

I got a set from machine Mart, has a holder in it that fits the 3/8 ratchet and then loads of different Allen key and torx ends you can swap over

They have. Well they did when they a derivative of the engine in to the free lander,they fitted spray bars to the cylinder a fairly easy mod that can be retro fitted so I am told

If possible try warming the engine up, I e running it for a while As a side note what length are the bolts? I suspect I could supply some nice shiny stainless bolts to replace it with

If you get one fit the oil spray bars from a land rover discovery it helps prevent the hg going and so I'm told Is an easy modification to do

Can supply all specs of BRAKELINES for most of the Audi vag range plus most other makes Can now also a braided clutch line for £30 deliverd

Yes mate can do most cars They can contact me via PayPal address which is also my email

Not a problem!! Have come across that problem many times, people think because you fit calipers from x car that you need to fit the lines from the same car. When Infact you more than likely require custom / bespoke made to order items like I supply

They do them on the deli counter in waitross

Yes they are Morrisons do one with quail egg in the middle that's really nice

Sold

Still no payment despite being online First person to send funds over gets them

No longer available new Last available set I got and exported to new zealand

Sold pending payment being recived

here we have a set of brand new rear braided brake lines supplied to me in error as part of a set £30 delivered which is a bargain

Pooh that's not good When I worked for jaguar / landrover we lost a brand new RR sport due to mice, it had being sat at a storage compound awaiting sake, little rodents got in, destroyed the insides of all the seats and the loom. Was more econimacal to use its as a parts car than it was to repair!!!

Yes I am Or on eBay 9657adriana is the user name Cheers

Afaik they are 1mm though they could use both,

Yes the fronts are an m10 x 1 thread you want a length from bottom of head to tip of bolt of around 22mm