swampy

Have a few pairs of the 10.9 And some of the 12.9 all ready to go

sure you can get a satin effect vht paint http://www.ebay.co.uk/itm/High-Temp-Heat-Resistant-BBQ-Chiminea-Paint-200ml-/160441407310?pt=UK_DIY_Material_Paint_Varnish_MJ&var=&hash=item255b0d974e scroll down thru the options and they do a few silver finishes, bet you could find it cheaper / easier at a local large garden centre. paint it and fit a set of my new bolts (see suppliers forum) and jobs a good un

hi ian i have sent another set out. all other orders are now posted

i love harewood as a venue. only ever being to hillclimbs there though. are they static shows?

Think you should learn to control your fingers and watch what you say!!! As the man from pirtek pointed out and what I said in the first place all that was needed was the olive and union reseating!! Not hard or difficult to do!! Now keep your derogatory and potentially slanderous comments to your self Both on this thread and any others

Time to find some one braking one and see if they will donate it to the cause!! Or some good pictures so I can an idea of what's required

where do they run? any one idea what ends are on them? i e do them clamp on or are they threaded ends? taking the pressure isnt a problem, the company that supply my braided brake lines also do fuel hoses including sampling rigs to FIA spec so im sure they can manage some normal fuel lines.

As in hex head?? Or mild steel??

Dip stick bolt : 6x16 cap bolt -1 Fuel rail to inlet : 6x12 hex head bolt -4 £2.50 (bolts for fuel rail and dipstick) Upper timing cover: 6x65 cap bolt -8 8x30 cap bolt -2 6x10 hex head bolt -5 £8 for all above Lower cover: 6x55 hex head bolt -2 6x16 hex head bolt -16 £5 Coil pack : 6x70 cap bolt -4 £3.50 Slave cyl : 8x30 hex head bolt -2 £1 THOUGH ALL BOLTS WOULD HAVE A SOCKET CAP HEAD SO ALL WILL MATCH WHAT I ALREADY SUPPLY all bolts would be stainless steel and come with washers cheers

im not familiar with the pipes in question, but i can supply braided fuel line if they could be replicated in that

Spot on You got my address?? Ill expand my lines to as many items as you guys want!!!

That's spot on, let me have the bolts you want, the area of the car they are from and the qtys etc and we can sort it I can't make the brackets though unfortunately

Hi If you can tell me the sizes, lengthes and qtys them yep I can almost certainly supply items that will be more than up to the job

Have to agree the c63 is a very nice place to be And holding it on the limit even with the electronic aids turned off isn't that hard to do ( then again I was offered a job as an instructor at Mercedes world so can drive abit)

here we have a few items on ebay http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=121033151421&ssPageName=STRK:MESE:IT http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=121033151423&ssPageName=STRK:MESE:IT http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=121042521132&ssPageName=STRK:MESE:IT http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=121042653740&ssPageName=STRK:MESE:IT http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=121044306371&ssPageName=STRK:MESE:IT http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=121045829258&ssPageName=STRK:MESE:IT can do deals on multiple items via here

Hi mate you have a pm Let me know as I only have a few of the rears left at that price

All sorted mate another custom set up on the way I still have this one available

You have a reply to your pm My lines are made by a motor sport supplier

Have a look at my thread in suppliers forum then on me some details and ill look at them when I get out of work

I'd be looking at the dizzy cap or rotor arm Plugs won't cause it to cut out normaly If you do earth the plug to the body hold it with a set of pliers as you get an awful wack off it

1st order of the new year goes in on the2nd jan

hi you both have pms. if i get payment today i can post tomorrow many thanks

Treat the car this christmas