Show us your drops

[NickVR6 0]

Sorry, must be the welsh love in me. :oops:

 

Heres mine on koni ta's and H&Rs.

 

Front 61to ground or 33.5 to wheel centre

Rear 62to ground or 34.5 to wheel centre

 

bear in mind its all new and about a month old, so settlement to come, and im going to drop the rear a notch on the adjusters to level things up.

[Andy Brookes 0]

Second 2 pics with the new wheels (8x17, 205-40-17) I prefer the arse to be a little in the air and a little higher all round than it was, current measurements are 590mm front (305mm centre's) and 610mm rear (320mm centre's). Rear tyres are nearly new and fronts are worn which gives the 5mm difference between front and rear.

 

First two pics with the old wheels (7x17, 205-40-17)and very low. I did measure the heights and seem to remember 580mm ish all round.

[flusted 0]

The only accurate way to measure,and the way vw measure is from the centre of the hub nut,to the lip of wing.I think clean the thread up and get people to put this measurement in.

VW state something like 340mm from hub to arch so if yours is 300mm then yours lowered 40mm etc

[pkripper 0]

front

320 centre of hub

580 to floor

 

rear

330 to centre of hub

590

 

on Spacs kit, with standard 15 inch BBS

[billinjah 0]

lovely motor pk, c'mon furks and bally get yer pics up!

[flusted 0]

Heres a pic of mine,

 

floor to arch front 530mm floor to arch rear 560mm

hub to arch front 270mm hub to arch rear 290mm

 

so my cars lowered 90mm front and 70mm rear

[lukeage 0]

kev - are they BBS RK II your sporting now, loving looking wheels, how are they for the ride? i am sizing them up as a replacement for my speedlines

[carpoid 0]

Heres mine ; 565mm front, 575mm back, FK Silverline Konigsports, 195/40/16 Tyres.

Very happy with ride, just put a 50mm spoiler on to avoid the scraping !

 

[hutchyvw 0]

Here's mine

 

not measured it yet but i will soon.

 

its on supersport coilovers.

 

hutchy.

[Kevin Bacon 5]

Cheers guys, keep em coming :-)

 

And Floor to arch, or fiddling about trying to guestimate the centre of the hub....I know which is easier, keep it consistent please.

 

Lukeage, thanks dude. They're BBS RX mate . Ride quality with Eagle F1 GSD3s pumped to 32 front, 30 rear is absolutely spot on 8)

 

Andy Brookes' rims look fantastic 8)

[Bally 0]

myn.. lowered on FK coilovers.. never measured it...

[carpoid 0]

Go and measure it !! Looks sweet 8)

[flusted 0]

bally,just for me,can you measure center of hub to lip of wheel arch

[turbomagikz 0]

okay kokey ! here,s my attempt ( parked uneven ) its somewere near ! :crazyeyes:

17" rimz... front...center / arch = 285mm (560mm).

" " " "....rear....centre / arch = 290mm (565mm).

vr6 ... FK highsports...17" atp,

:thumb right: a sweet set of coilovers / nice ride / no problems at all !

recomended to all virgin SLAMMERZ !

RIDE with yah dangleys scraping tarmac ? :multi: :onfire:

[stevemac 0]

Mine's in the piccy below - no idea on measurements though. I'll measure it tomorrow, if I remember.

[Valerian 0]

17 inch dezents plus spax springs and shocks

[ToffeeRado 0]

Heres some pics of mine sorry for all the pics

[fla 9]

ToffeeRado, how did you get the front vents done? :offtopic1: Anyway, you're all bloody showoffs i hate the lot of you. Just because i've got crappy normal height.

Very nice thread i would add.

[ToffeeRado 0]

ToffeeRado, how did you get the front vents done?

It's just one vent and it was welded in.

[Furkz 0]

let me know guys when your ready for my drop

[Bally 0]

let me know guys when your ready for my drop

 

go on then.. drop em :lol:

[Bally 0]

bally,just for me,can you measure center of hub to lip of wheel arch

 

justb read yr post.. yeah if I can be arsed :lol:

[Furkz 0]

haha

 

theres loads more in the gallery

[Bally 0]

more of furks car!

[Furkz 0]

cheers bal :lol:

 

the back is even lower now, its crazy but it works