Trig 0 Posted December 30, 2005 So is that suede on that wheel?? Quote Share this post Link to post Share on other sites
Lanceevox 0 Posted December 30, 2005 Will this: http://cgi.ebay.com/ebaymotors/MOMO-Ste ... dZViewItem steering wheel fit by 92' corrado vr6? What else will I have to buy to fit this to my car? Quote Share this post Link to post Share on other sites
double-6s 0 Posted December 30, 2005 triggermyson, that is indeed suede. imo it feels so much nicer than leather. also gives a much more 'racey' look which i like. Quote Share this post Link to post Share on other sites
RS VR6 0 Posted December 30, 2005 Will this: http://cgi.ebay.com/ebaymotors/MOMO-Ste ... dZViewItem steering wheel fit by 92' corrado vr6? What else will I have to buy to fit this to my car? You will need a Momo hub adapter P/N 8014. Be aware that a 300mm wheel is very small. Lol...the top of the wheel is probably going to block your gauges Quote Share this post Link to post Share on other sites
double-6s 0 Posted December 30, 2005 Will this: http://cgi.ebay.com/ebaymotors/MOMO-Ste ... dZViewItem steering wheel fit by 92' corrado vr6? What else will I have to buy to fit this to my car? You will need a Momo hub adapter P/N 8014. Be aware that a 300mm wheel is very small. Lol...the top of the wheel is probably going to block your gauges Indeed - i can see sod all of my dials now! only the bottom sections where the needles never are ;) i can recommend 300mm though - just put your seat back a little bit more upright for a bit more leverage at high speed!!! it does make the steering feel fantastically direct though :) Quote Share this post Link to post Share on other sites
dinkus 10 Posted December 30, 2005 Can you still reach the stalks too tho? Or do you have to stretch for them? :lol: Quote Share this post Link to post Share on other sites
double-6s 0 Posted December 30, 2005 dinkus, unless you have short fat sausages for fingers you'll be ok!! no probs reaching the stalks. Quote Share this post Link to post Share on other sites
Kevin Bacon 5 Posted December 30, 2005 I like this Raid, need to try and find a UK supplier. My plan is to cover the grey section with black Alcantara, lose the chrome ring and replace the RAID horn button with a VW one 8) Quote Share this post Link to post Share on other sites
Lanceevox 0 Posted December 30, 2005 Does this: http://cgi.ebay.com/ebaymotors/MOMO-Ste ... QQtcZphoto LOOK like it will fit on a corrado and support the 300mm steering wheel I just bid on? Quote Share this post Link to post Share on other sites
RS VR6 0 Posted December 30, 2005 Just hope its a 8014...there is a 8010 for the pre 89 cars. Quote Share this post Link to post Share on other sites
Supercharged 2 Posted December 30, 2005 Just hope its a 8014...there is a 8010 for the pre 89 cars. If not you can remove the splined adapter with a 3 legged puller... Quote Share this post Link to post Share on other sites
RS VR6 0 Posted December 31, 2005 shhhhh...industry secret. :nuts: Quote Share this post Link to post Share on other sites
iow_corrado_g60 0 Posted January 5, 2006 ive got a momo proto tipo old porsches used to have them will get pic http://www.pelicanparts.com/catalog/sho ... 91_pg9.htm found one its a lovely steering wheel 350mm diameter but also the tubeing is really small easy to grip i really like it but the middle of mine is carbon black! Quote Share this post Link to post Share on other sites
iow_corrado_g60 0 Posted January 5, 2006 i used to have a white italvolanti on my 89 golf gti and that wasnt as nice Quote Share this post Link to post Share on other sites
Phil K 0 Posted January 5, 2006 Here's my Momo Corse - not the best shot but was tring to get my rings and mats into :? As far a it goes for a wheel I really like it but would like to try a smaller diameter to see if's any better/worse Quote Share this post Link to post Share on other sites
double-6s 0 Posted January 5, 2006 iow_corrado_g60, nice rado mate. i'm loving white. and although i wouldn't have one, i'm liking that steering wheel too. :) Quote Share this post Link to post Share on other sites
Lanceevox 0 Posted January 6, 2006 When installing a new steering wheel what is really important to do? I installed my momo and was wondering if I should know anything about the installation because I just sort of figured it out on my own. Quote Share this post Link to post Share on other sites
double-6s 0 Posted January 6, 2006 do up the bolts! and make sure its straight. thats about it mate. oh, and make sure its your car you fitted it to ;) Quote Share this post Link to post Share on other sites
Stone0311 0 Posted February 8, 2006 Just snapped up a Momo Corse wheel off fleabay, comes with a mk1 golf hub >> does anybody have any ideas on wether they are the same as an early C fitment?? Cheers Quote Share this post Link to post Share on other sites
double-6s 0 Posted February 9, 2006 i don't know, but i think so mate. and the later Cs are the same as mkII golufs?? Quote Share this post Link to post Share on other sites
Lippy 0 Posted February 9, 2006 just to book the trend, I wouldn't be in a rush to change the standard (late valver) steering wheel. Not seen one wheel that suits the age of the C so until I do you can't tempt me! Lippy Quote Share this post Link to post Share on other sites
Trig 0 Posted February 9, 2006 Phil K, loving that wheel mate, not overly fussy. :) Quote Share this post Link to post Share on other sites
Waz 0 Posted February 9, 2006 does any body have a 3 spoke vr6 steering wheel they can sell me thats if it will fit on my valver cheers Quote Share this post Link to post Share on other sites
double-6s 0 Posted February 9, 2006 do you really want one mate? they're a bit horrible tbh Quote Share this post Link to post Share on other sites
Waz 0 Posted February 9, 2006 i just think they look better than the stock valver one m8 Quote Share this post Link to post Share on other sites
