swiftkid 1 Posted January 21, 2016 Haha no worries, I've had my full car in bits at one time or another so hope I know my way round a rado. I may well treat myself to a biscuit though! I reckon it deserves a ride in vrt ;) Quote Share this post Link to post Share on other sites
VAG-hag 0 Posted January 21, 2016 It's great to learn more about them. First time for me tackling the dash and its hidden treats :) No worries re ride. It's a hoot Quote Share this post Link to post Share on other sites
robrado974 1 Posted January 21, 2016 The dreaded heater matrix. Always a joy ! . Quote Share this post Link to post Share on other sites
Jim 2 Posted January 21, 2016 Good luck with it! Seems to be a rite of passage for Corrado owners these days. Damn thing. Quote Share this post Link to post Share on other sites
VAG-hag 0 Posted January 21, 2016 To be fair the old one looks great but I'm glad to be changing it as I don't fancy poached ankles :) Quote Share this post Link to post Share on other sites
sexybourbon 0 Posted January 21, 2016 Felty flaps Quote Share this post Link to post Share on other sites
VAG-hag 0 Posted January 21, 2016 I can't wait to felt my flaps!! Quote Share this post Link to post Share on other sites
swiftkid 1 Posted January 21, 2016 Lol, the stuff you 2 come out with is quite concerning! Quote Share this post Link to post Share on other sites
sexybourbon 0 Posted January 21, 2016 At least they wont be squeeky flaps, that would be of concern Quote Share this post Link to post Share on other sites
VAG-hag 0 Posted January 22, 2016 Lol, the stuff you 2 come out with is quite concerning! :lol: Quote Share this post Link to post Share on other sites
Cressa 44 Posted January 22, 2016 I've just done mine. Swapped everything over from a P plate polo heaterbox as everything fit perfectly and its a better foam. I did put some pictures up. Quick, easy, work's and all genuine Quote Share this post Link to post Share on other sites
VAG-hag 0 Posted January 22, 2016 I'm looking forward to getting this done over the weekend. Thanks cressa but I think I'm going to upgrade the originals mate, I have what's needed and I don't need to find a polo :thumbleft: Quote Share this post Link to post Share on other sites
Cressa 44 Posted January 22, 2016 If you want an extra pair of hands Saturday morning im happy to call over. I've had my dash out twice this year. Getting used to it now Quote Share this post Link to post Share on other sites
g0ldf1ng3r 15 Posted January 22, 2016 Don't know if you've seen this thread? http://www.clubgti.com/showthread.php?261279-Heater-blowing-cold-not-hot-matrix-cleanse-and-air-flaps-foam-refurb-guide awesome link thanks stuart though I changed the valver matrix last summer I could do with taking it out again to refurb the air box Quote Share this post Link to post Share on other sites
g0ldf1ng3r 15 Posted January 22, 2016 Good luck with it! Seems to be a rite of passage for Corrado owners these days. Damn thing. lol indeed Jim if you take your time its not too bad a job really though. I think the thought of it was worse than actually doing it Quote Share this post Link to post Share on other sites
Jim 2 Posted January 22, 2016 Agreed. I was mortified when mine popped - didn't think I'd have the skills to do it but actually it wasn't so hard. Took a little longer than I expected though, that's for sure :) At the point I have attached / pictured, I was seriously thinking I'd made a huge mistake :) Quote Share this post Link to post Share on other sites
g0ldf1ng3r 15 Posted January 22, 2016 Agreed. I was mortified when mine popped - didn't think I'd have the skills to do it but actually it wasn't so hard. Took a little longer than I expected though, that's for sure :) At the point I have attached / pictured, I was seriously thinking I'd made a huge mistake :) ha ha ha I remember that point in your photo very well m8 & feeling the same! I found one of the hardest bits was to get the drivers side bulk head nut back on the bolt due to the it being in such a tricky place to get your hand in TBH when I changed the radiator in the VR I recall looking at it after the first day, when it was all apart, & thinking 'oh dear, this is going to end up on a trailer to the mechanic' lol fortunately that didn't transpire BUT I may have to face that again so as to change my rad fans which seem to have gotten noisey recently Quote Share this post Link to post Share on other sites
g0ldf1ng3r 15 Posted January 22, 2016 I'm looking forward to getting this done over the weekend. Thanks cressa but I think I'm going to upgrade the originals mate, I have what's needed and I don't need to find a polo :thumbleft: just to check chris, have you got a good guide with pictures? Quote Share this post Link to post Share on other sites
VAG-hag 0 Posted January 22, 2016 Agreed. I was mortified when mine popped - didn't think I'd have the skills to do it but actually it wasn't so hard. Took a little longer than I expected though, that's for sure :) At the point I have attached / pictured, I was seriously thinking I'd made a huge mistake :) It actually gave me nightmares last night. been up since 0300!!! yes that looks very familiar :lol: Quote Share this post Link to post Share on other sites
VAG-hag 0 Posted January 22, 2016 just to check chris, have you got a good guide with pictures? I stole the guide from Corrado club Canada Andy. Its OK but could do with re working..... would you like me to take some nice pics of flap improvements etc? Quote Share this post Link to post Share on other sites
g0ldf1ng3r 15 Posted January 22, 2016 (edited) I stole the guide from Corrado club Canada Andy. Its OK but could do with re working..... would you like me to take some nice pics of flap improvements etc? I have the one Kris did on here & I managed to find all but a couple of the images , very similar to the Canada one but more pics I believe. if you would like ive got it on word document if you want to PM your email addy m8. I found it invaluable as it shows where all the screws & bolts are located etc yes pls on the flap improvements m8 - I would find that very helpful PS don't loose sleep over the task in hand, patience & organisation makes it ok. FYI I used lots envelopes to put the screws of the various sections in, sealed them & labelled the front. takes time but made it so much easier to put it all back together Edited January 22, 2016 by g0ldf1ng3r Quote Share this post Link to post Share on other sites
VAG-hag 0 Posted January 22, 2016 Bit late for that screw idea :lol: but I didn't go at it without thought. Most screws and nuts are back where I found them to make it easy to know which goes where and will help avoid missing any out. The doc would be ace please bud. I'll pm you. Thanks kindly Quote Share this post Link to post Share on other sites
Design380 10 Posted January 22, 2016 Hi Andy I'd appreciate that Word document, it's a job I'm going to tackle in the near future, not had any problems but think it's worth doing as I'm not sure if its ever been done and sods law determines once the cars on the road it'll pop! I'll pm you my email details if that's ok. Cheers - Paul Quote Share this post Link to post Share on other sites
g0ldf1ng3r 15 Posted January 22, 2016 happy to helps chaps - guide now sent to you both :) Quote Share this post Link to post Share on other sites
