LowG

:)

Hm i dont quite remember as i have dozenz of emails about the car everyday but its cool.I have 17" alloys and the car is on coilovers so i dont a problem at all as i can set up the heoght i want.

bypas the charger and try it man :D

greassyy get that sucka ported

Thanx bro, :D :D

i used spray tint,sanded after they dryed with superfine 1500 wet and dry and used polishing spunge with polishing agent. just like you spray a car,this way you get the perfect tint and no bubles or flaws. i have done a little something to the rear reverse area :D :D it looks the bomb trust me,ill post pictures soon.

well i just finished my rears after all that sweat and tears. I used black tint spray,after cleainign the lights with methylated spirit i sprayed them,dryed them and sanded them down using 1500 paper wet and dry,its really easy to do it this way as you can easy control the sanding and you know the amount of tint you want. After i was happy with the tinting i used polishing wax (or t cut does it)on the roatating spunge and waxed them to get a perfect finish and shine,not bubles or flakes but smoth silky tinted lights that look sweet. I WROTE G60 on my reverse white area and it looks niceeeeeeeeeee. :D

hmm

oh i just asked you again about sensors..dope :D

how much do 30lb injectors cost?i hope i make more than 15 psi with my new charger. Guys what about O2 sensor,im sure you have to uprate them aswell or im i wrong?

i aint coming,as im still in the process of fitting charger and intercooler so all the piping has to be sorted ,i really wanted to come though,you guys should snap some pics for us that aint coming :D .

:x

o2 sensor i think,fuel regulator chip and a few other things which i cant think of.

i have a brand new window strip which I bought 4 months ago,its the driver side,i ordered the wrong side and because it was a special delivery they wouldnt return it and give me the right side,so im stuck with it at the moment. My passanger side still ahsnt got the strip since then :( iF anyone need the drivers side i could sell it cheaper as i need to get the other side,its not used still in the seal with recipt. if anyone wants it would do me a big favour as im stuck with it.

i see,i bet you cant wait :D ,question,what did you use to clean the intercooler before you installed,if you cleaned it at all. i found some good metal working shop around my area and they will do my piping from stainless steel,i wint gonna use any plastics exept for the joints from the RSR outlet to IC pipe and to throttle body,the bend from charger to ic will be made complete from steel so it should have a nice flow altogether.

so how does the car run darren?you feel any differences?

there is an issue here because depending on the manifold type you might not be able to fit the alternator in its original position. im still thinking about it.

u thrwoing away yo money for this conversion man cuz quite frnalky not much ppl give a damn what driving side you car is. Now you go and spend than money on the car and engine and thast when ppl will respect you when you got all that heat under your engine 8) just my opinion but as banana said just get a car from UK much easier

g60 have you looked for the head then?? U better start looking man :D ,i want one.

from 100 to around 150

looking good :D i plan in really giving my C a good clean once she is all fixed up. How hard is it to take the seats off?

you doing that on a 16v head or crossflow?? Crossflow has nice flowing rate, better than g60 head so with little porting and right cam i think about 50-60 extra hp can be achieved and with a nice manifold that dosent heat up like the g60 manifold heats up due to being above the exhaust manifold you could be pushing serious power. :D

i have a spare headlight with a cracked lens so i was thinking of trying to modify it somehow to fit bmw 5 series lights. Would look great i think even if hte original thick lens is used. Anyone know where is the best place to get some cheap 5 series lights? would be nice to fit some xenons :D

how did you manage to do it? any more pics. I like the rear lights tinted they suit the colour :D i just tinted mines,i have writen G60 on the reverse light and looks sweet. I sticked G60 letter on teh clear reverse bit and sprayed over it.

have you got a link or tel number for r/a design,this is the last body mod i wanna do to my c. Would look good with teh tinted rear lights. 8) thanks

The panel is a Mattig product avalible from R/A Design.

 

going to go for a bike style plate for the moment on that panel until can sort else where to fit it

you can fit it on your bumper :D ,all you need is a plate bulb to make it mot legal and you are sorted,looks nice too/ How much did that plate cost you?