paddy26

If you sit into the car and lock it. Then pull the interior door handle on the passenger side to get a feel for the resistance on it. Do the same for the drivers interior door handle. Then unlock the car and check both handles and report back here. Also check is there much resistance if you try to unlock the doors using the door lock pull. \Paddy

Thanks. For reference in case anyone is looking in the furure, mine are: Front: helper: 20-60-80-GBHC Main spring: 70-170* GBFC Rear: helper: same as front Main: 50-200*GBFC \Paddy

Sorry to jump in but can you get a photo of the part number on the helper spring? I have a set of v3's and am curious to see if they all use the same helper spring, as I'd like to change to a softer one if possible. \Paddy

If you're removing trim pieces to tape them up you could go for a drive before refitting the trim. You'll eventually find the source of the rattle but you might have the full interior removed by then..... :) \Paddy

There are tabs on that trim piece at the top which slot into the c pillar trim. It's hard to tell from your pic but maybe part of that tab is missing which prevents it from securing properly. Here's a pic of what it should look look like. \Paddy

I love finding a thread like this that i haven't read before. Great write-up and videos and some amazing work over the winter. Most disappointing bit about the thread was getting to the end but I'm sure you'll have some more exciting updates during the year. Best of luck with the rest of the season. \Paddy

Vag-hag's one will fit so. I bought a new clamp from the dealers and there was only 1 part number for all models. FYI, in engineering distances between 2 holes/points is measured centerpoint to centerpoint(which is the same as LHS to LHS or RHS to RHS if talking about circles). \Paddy

I measured mine and it's 100mm aswell. That's on g60 and 16v. What's the part number on the 90mm bracket? \Paddy

Are these the ones? Not sure on the size of original vr6 discs: https://ie.vwheritage.com/shop/corrado/191615309A/backing-plate-front-brakes-mk2-golf-jetta-256mm-280mm-discs/?crumbStartPage=1&crumbStartRow=1 \Paddy

+1 for this. \Paddy

I loosened the pedal box which gave a bit more wiggle room to remove the servo. I was doing a full restoration at the time so it was easy for me to remove the pedal box. \Paddy

Big thanks to Rams for selling me his d90s. It created a lot of extra work for him as I live in Ireland. They were packaged very well and were as described. \Paddy

Lol

There's enough spare material to get me out of trouble if I misplace this one.... \Paddy

I got pics today so I want to update the thread. I had a part organised from the 2014 Audi Le Mans car, but that fell through shortly before the wedding. A week before the wedding I contacted Dude VR6 again and he sent me 2 pieces of titanium. It arrived the day before the wedding. I travelled 30miles to an engineering company owned by my managers dad. Within 3 hours we had the wedding band finished. Here's a few pics of the wedding bands And a pic of my Rado Massive thanks to Dude VR6 for coming through at such short notice. We can't thank you enough. \Paddy

Congrats. I got married last month aswell. I didn't have my Rado ready on time though. So had to use a Rolls The power steering was leaking onto the exhaust and smoke started coming from under the bonnet. The smoke had cleared before we got the pic. \Paddy

Are you going to use seam sealer on the joints 1st before you apply the dinitrol? I'm not sure if it's needed. I never did it on mine. Dinitrol do a seam sealer aswell. \Paddy

No. I'm still taking them. Rams is just organising photos before the sale goes through. \Paddy

the only cambelt issue you can have is when it snaps, and you'll know when that happens.... the engine is most likely going into limp mode. the issue could be with any or multiple sensors on the engine(maf, o2, temp, etc), vacuum leaks, coils, sticky turbo or actuator, etc. have you a diagnostic port connected for the engine? a scan will definitely narrow down the issue. \Paddy

Congrats. The car looks very well and obviously drives/handles even better. You'll have to post a list of mods. \Paddy

There are a number of unused plugs at the back of the fusebox so it could be one of those. Can you trace it back to a pin on the fusebox or wherever it's going?

Literally lol. \Paddy

I presume your talking about rear bearings. You should be able to move the washer with a screwdriver with minimal pressure. I posted the quote from the Bentley in a post a while ago in another thread. \Paddy

There is a g60/vr6 setup you can go for but I just reused my clutch/flywheel. \Paddy

You'll need the downpipe and you'll have to modify it if you're not buying a custom one. Are you getting the immobiliser deleted from the ecu? Are you keeping the corrado clocks? Your gearbox will work. You can use your clutch and flywheel.