Harrier

Your valve guides could be worn, which might make sense as you said it seemed ok initially. How many miles on engine ?

You can just about hear it with ignition on ,engine not running. If you touch it you can also feel if its working with slight vibration. I think it stops air locks forming when engine is switched off & its hot ,as it will run after switching off engine,also heard it helps circulation to heater,not completely sure though :shrug:

Looking good Craig , As Rams said bearings might just need nipping up, if they aren't noisy.Not too much though !

If it was a clutch problem i would expect other gears to be affected,especially reverse. :(

Strange one , Fuel pressure regulator ? Low pressure from fuel pump ? has your fuel filter been changed recently ?

Lookin good on the new BBS Andy :thumb right:

Should be able to get to this ,lets hope weather permits this year !

Colour code will be on a sticker in the boot, i would have said classic green. Looks very nice btw !

Liking the red rears, looking good :thumbleft:

Excellent meeting today from the convoy up with John & his fire spitting 16vg60 & the others from the South coast to a great show attended by some of the best Corrado's in the country & really nice chatting to everyone. Congrats to Kip,Dave & Jude on their awards :clap: :clap: :clap:

Me too !

I will be travelling on A3-M25 John, so could meet somewhere on route

Congrats on finishing so well,very impressive !

Hi Sean,i have a caliper wind back tool you are welcome to borrow,i have a workshop just up the road in Droxford. Daren

Nice to meet some new faces & see some new cars today on a gorgeously sunny day in the New Forest. A very good lunch & a chat was followed by a quick blast to a local beauty spot, with a short stop en-route at Halfords to get some tape to secure my windscreen trim which was trying to part company from the car.Will talk to screen fitter Monday about that ! Another meet in the near future would be great.Rams car is superb & also found my C has a near twin with Subcools Vr, Same colour,spec & nearly same reg. Loving his wheels & arches.

I will be there,see you then

Wow,looks great.Saw that mag last weekend but didn't buy it as PVW is my normal read & they had a nice U.S Vr featured,so bought that.Will get your issue soon & read with interest.

Only met Chris once,at 2003 National day.Very knowledgeable guy,sad news

Ok, the new screen went in Friday & i'm glad to say everything is fine. It was a Sekurit screen as i'd hoped but they couldn't be sure what make would arrive.I also have a top tint now as requested Was also glad to be able to get scuttle trim clips from Vw. So today finished off my big clean up with a coat of Dodo Wax & vacuum interior, & then enjoyed a little drive with a couple of Springtime pics

I could make that Rams,be nice to meet you & finally see your C !

Looking forward to seeing this at Stanford Chris.

Thanks Andy, well wifey would be happier if they went into the garage with the car ! but i'm sure i can find space ---------- Post added at 10:16 PM ---------- Previous post was at 10:00 PM ---------- Btw Andy,if you are still membership sec? for CCGB could you send me a new tax disc holder with my recently renewed membership .Thankyou

Well the screen is out without any major problems,however when unpacking the new screen it was found to be damaged, or rather the edge trim was,so the guys have re-ordered another. On the plus side it gave me a chance to clean everything nicely & treat a little bit of corrosion along the bottom edge.Will try again in a couple of days !

Yes, a couple of times though not for a Corrado. They were efficient & reasonably priced

A company called BBA remanufacturing are pretty good tel 01634687222