Alex_G60_Fanatic

can you not just tell them to hold off on the pully? You'll only have to pay for the FULL AMOUNT later??!!!! seems silly to pay TWICE! :shock: Or borrow £70 off your mum/dad... That's what i tend to do... :brickwall:

LOL If your going big... should you not consider porting to stage 5? and not stage 4 it's only an extra £70 or so... and if your going that way anyway! :wink: although, This will defiantly mean getting a custom MAP as per Yan's advice.

The SNS chip will should give you decent off the shelf performance for the stage 4 charger and the 68mm pulley but for the princely sum of about £200 DG Autotech will provide a custom map to suit your car. I have said it before and I will say it again, the variances in G60s due to the build process coupled with the age of the engine mean that it is increasingly likely that the 'off the shelf' chips will not work as well as they once did. A custom map will mean you get the best from your G throught the rev range, I know my mods on mine are not the norm (chargecooler, BBM boost pipework) but I was amazed at the difference between the before and after feeling when driving the car. The AFR output is now on the money for best acceleration on WOT (wide open throttle) and is very even, unlike the pre-MAP figures which are up and done like a yo-yo. So simply put my recommendation would be a custom chip and to get up to DG Autotech for it (about 3 hours from Yeovil). WORD :salute:

hey KUR2Y Could you please put me down for a 3 relay loom with the.... wait for it.... THE NON-OEM connectors. :shock: After reading the thread in some detail now... I don't see the need so long as the other connectors you do will fit i aint bothered what they look like! :D Also... if it's not to much of a fuss could you have a look into housing the relays into one of these? http://cpc.farnell.com/jsp/search/resul ... 11+1002322 I will obviously pay for any extra bits + faffing about required AND I don't mind waiting for the loom till when ever you get round to doing them as the car is currently off the road. PM me with thoughts on the enclosure if you need to LOVE LOVE ALMUNDO xxx Edit: How do they the non OEM connectors look BTW? I couldn't see any images of them in this thread

was only joking Rob :wink: like Rob says, redtops aren't needed unless your "under fuelling", probably wont experience that with a stock G60 on a smaller pully. Are jabba porting it for you? Edit: sorry, just saw "stage 4 rebuild"

Also the power gain isn't as impressive with a 65mm pully... any way, in answer to your question the best thing to do with your G60 is to get Jabba to send it to Gworks ASAP! :lol: I've herd some bad stories coming from there via this forum...

My council lock-up was £12 for non-council tenants... sounds cheep to me! but like kerrly said... They can be VERY small. Just ask to have a look before you get it.

sorry to be a bum but if they're free from that website then thats the ones im going for! sorry ladies :lol: :tongue:

just PM Kris... He has all the photos already to go!

That was AMAZING... Bravo!

well the 10th has come and gone... and still no rollers :mad2: According to the company making the rollers they have had to put ours on hold as one of their CNC machines is down for maintenance. They are due to be turned ANY DAY NOW... I'm realy sorry I can't be more specific and i am really sorry to those who where prompt with making your payment. Once i get the rollers in my hands I'll have them sent out within the next day! Regards Almundo of Dundee

oi oi... how do you know this then hey! :lol:

any interior trim that you need that I have spare Ill send your way for the cost of the postage mate, no worries :) Did they find the people who nicked it or just the car?

[youtube:2avbvxvm]8GTvvbKqbzA&feature[/youtube:2avbvxvm] Saw these boys on Saturday night and they where jumping!

just to let you all know I should be in receipt of the rollers by the 10th, please allow me a few days to post them all out though. Also Could Jerry Daniel please PM me

Hey fella, can I have 1 please :D

:lol:

Well the material used to make the rollers does have a higher density unfortunately, lets say you have a stock VR6 with no mods. you'll be running 187bhp and (assuming your not a fatty) we'll say you weigh 85kg and the car has a weight of 1240kg that's 141.1320754 bhp/tonne now, the existing rollers weighed 10g with a density of 1.14g/cm3 and the new rollers are exactly the same size but have a density of 1.42g/cm3. That means the new rollers weigh around 2.46g more than the originals! Four rollers mean a total increased weight of 9.84g (0.00984kg) sooo add that all together and you get a new figure of 141.1310273 bhp/tonne Thats a DECREASE in power/tonne of 0.0010481bhp/tonne Sorry pal :( Edit: you could put that burger down though and increase the power to weight ratio!

could Mr **** ***** please read his email!!!! :? Edit: A quick search through my PM's solved this problem so i've deleted the name but please remember that paypal doesn't send me your forum name... you need to put it on your payment details else i don't know who you all are

lol... Indeed not!

would it be cheeky for me to put in my broken C in for a month! :lol: :lol: It would highlight the normal status of most corrado's!

it's looking like there are no more left... Sorry mate. If someone fails to pay I'll let you know In other news I have put up a new list for unsold rollers on page one... please take a look ALSO... stingman123, CiaranMk1 please check if you have paid or not. I have nothing to confirm if you have as of yet... AND... I have one PAY PAL payment that has no forum name against it... PLEASE CHECK THE FIRST POST to see if you have the correct status next to your name FINALLY... I have it on good authority that the rollers will be delivered to me by the 10th of November, so everyone who has paid should get theirs by the 14th :grin: :grin: :grin: :grin: :grin:

ill have to count the spare and get back to you pal :)

You may find that vag no longer make it. Remember reading something about it on here. There was talk of trying to find an alternative but that conversation didn't go anywhere

black C going up the M6 late last night (Halloween) around liverpool area....can't be too specific as I was half asleep in the passenger seat of my GF's Yaris and we'd been driving North for 4hours by that time.