rado-steve 0 Posted October 22, 2009 Found This Mate from York.... http://www.youtube.com/user/Jon77vw#p/u/9/l-T0uO0f8Xg Nice Mk2, looks very tidy! Is the audi still going ok???? Quote Share this post Link to post Share on other sites
big ben 10 Posted October 22, 2009 i know most of you will think im mad but i have my reasons, the corrado will be going up for sale at some point as its taking up room :cuckoo: neil would love to hear your reasons :lol: looks a good condition mk2 though, white is the colour which is doing it for me to at the min!! Quote Share this post Link to post Share on other sites
neil20vtc 0 Posted October 22, 2009 Found This Mate from York.... http://www.youtube.com/user/Jon77vw#p/u/9/l-T0uO0f8Xg Nice Mk2, looks very tidy! Is the audi still going ok???? think thats when i fried my clutch! an yeah mk2 is pretty tidy couple of small bits need tidying up but a good base for me to use an audi is still goin good mate think the clutch is starting to slip a bit though but ive been told its not too bad a job i know most of you will think im mad but i have my reasons, the corrado will be going up for sale at some point as its taking up room :cuckoo: neil would love to hear your reasons :lol: looks a good condition mk2 though, white is the colour which is doing it for me to at the min!! basically just cos its not clean enough for me would need a full respray for me to be happy an id rather put that money elsewhere plus ive just got a thing for mk2's just feel more raw than a corrado god knows what it will be like with thw 20v lump in! Quote Share this post Link to post Share on other sites
neil20vtc 0 Posted October 22, 2009 pic of the rado in its current state well its actually got nowt left on it now an ive started stripping the golf down, get the engine out tomorrow aft when ive finished work then remove the subframe for a clean and paint Quote Share this post Link to post Share on other sites
tedman 0 Posted October 22, 2009 looking forward to the mk2 it will be insane with that engine :notworthy: Quote Share this post Link to post Share on other sites
KADVR6 0 Posted October 22, 2009 mk2 golf and 1.8t is the way forward, i dont like mk1's with 1.8t's in them as i think the engine is just to modern for that car. are you thinking about 4wd?? only asking as i have someone with a rallye he's contemplating breaking. Quote Share this post Link to post Share on other sites
big ben 10 Posted October 22, 2009 this car will be the bollocks, would love something like this as a daily :D please keep us updated, im sure you will :salute: Quote Share this post Link to post Share on other sites
neil20vtc 0 Posted October 27, 2009 mk2 golf and 1.8t is the way forward, i dont like mk1's with 1.8t's in them as i think the engine is just to modern for that car. are you thinking about 4wd?? only asking as i have someone with a rallye he's contemplating breaking. no fella just gonna be 2wd all this is new to me never mind fitting 4wd! Quote Share this post Link to post Share on other sites
neil20vtc 0 Posted January 2, 2010 little update the pug blue corrado is now gone, i stripped anything worth having off my smashed up corrado and thats now gone to the scrap yard :'( ive waited to get the car inside at the garage for a bit so i could take the subframe, arb,power steering rack etc off and get them cleaned up and painted as might as well when the cars in bits ive been on with this over crimbo ive bought full polybush set for the car which will go on when its in bits plus, new wishbones,ball joints,track rod ends,sus top mounts and full set of vibratechnic mounts so the cars nice and tight when rebuilt also got a new rad support panel as the one on the car was bit too scabby to be saved was one of the last available so lucky got it when i did! im lookin forward to crackin on with it but will have to sort my other half a car out first as she smashed hers up an is usin my murder wagon(audi 80) for work neil. Quote Share this post Link to post Share on other sites
Stan 24v 0 Posted January 7, 2010 Hey Neil, only just seen this. Gutted about your old C mate, glad you're ok though. Quote Share this post Link to post Share on other sites
neil20vtc 0 Posted April 23, 2010 Hey Neil, only just seen this. Gutted about your old C mate, glad you're ok though. cheers stan i was gutted at the time but moved on now the mk2 will be sweet when its done anyone interested in following the build should go to http://www.cumbriavag.co.uk/index.php?topic=592.0 neil Quote Share this post Link to post Share on other sites
neil20vtc 0 Posted April 25, 2011 well im back in a corrado just got a mettalic black vr6 already has koni coilovers, ss exhaust, black leather plan is to use it daily for now, its got a few bits that need sorting(couple of scabs on back arches, spoiler needs repainting,some cracked interior trim) a change of wheels is on the cards just dont know which ones, ive fitted the gearnob and steering wheel out of me old rado (these are meant to be going on the golf!) i wish i hadnt sold all the goodies off me last one now but i needed the coin at the time! oh and its good to be back just feels right being in a rado again! heres some of the few pics i have had a drive out an went to this spot thats always good for a photo but only managed this one of the gf showin some corrado love then the camera batterys died! neil. Quote Share this post Link to post Share on other sites
coullstar 0 Posted April 25, 2011 Nice one. Hate to use it but "once bitten forever smitten" is so true. Quote Share this post Link to post Share on other sites
dragon green 5 Posted April 25, 2011 Welcome back ! I for one was gutted when your old Corrado was totalled ! New one looks tasty Quote Share this post Link to post Share on other sites
Jon_vr6 1 Posted April 25, 2011 Wehay welcome back Neil, your Mk2 projects coming along well and now a rado vr6 NICE! Quote Share this post Link to post Share on other sites
neil20vtc 0 Posted April 26, 2011 cheers chaps and jon yeah the mk2's gettin there now lost faith in it for a bit as my rattle can bay spraying didnt stand up to the winter sat outside very well so wish id had it done properly now but you live and learn plus i was skint at the time! Quote Share this post Link to post Share on other sites
CazzaVR 0 Posted April 26, 2011 Looks like a good 'un! Nice colour combo 8) Quote Share this post Link to post Share on other sites
neil20vtc 0 Posted February 17, 2012 couple of recent pics got some new wheels for it ages ago but never put any pics up not really done much else apart from some pressed plates and lowered the back slightly when the new wheels came, would have lowered it all round a bit more but the front coilies have siezed i lathered them in wd but been too busy to try move em again Quote Share this post Link to post Share on other sites
Abdul 0 Posted February 17, 2012 Looks lovely mate! Quote Share this post Link to post Share on other sites
neil20vtc 0 Posted July 10, 2012 as requested by mr osv some pics of my golf now its all together along with some of its journey sorry if there not in order an finally one of them both together Quote Share this post Link to post Share on other sites
Jon_vr6 1 Posted July 10, 2012 That MK2 looks the business fella you should be well proud :thumbleft: Quote Share this post Link to post Share on other sites
OSV 0 Posted July 10, 2012 Great work Neil, the MK2 is a real credit to you and the Corrado looks great on the Comps:thumbleft: Quote Share this post Link to post Share on other sites
neil20vtc 0 Posted October 9, 2014 well after using the corrado as my daily for the past few years its now in need of a bit of tlc so i have taken it off the road the plan is to treat it to nice new bolts and powdercoated goodies for underneath a fresh lick of paint and to stick a turbo on it! i have decided to give turboing it a go myself and will be doing this first slowly taking my time then once its been running and im happy with it i plan on pulling the motor out getting the car sprayed and fitting the fresh running gear along with the engine after its been spruced up a bit i went as far as booking myself in to do a evening course at college doing tig welding so i can make my own downpipe plus i just think it would be something good to be able to do, but the original nite was full and the extra one they were going to put on didnt get enough numbers so im going to have to wait until feb to get started on that anyways i have been collecting a few turbo parts and also started stripping bits off the car ready here are some pictures the powdercoated bits and oem bolts washers bushes bearings etc were the stuff that useoncedestroy was selling on here someone local to me had bought them and they came up on my local forum when he was selling his corrado and some of how far i have got taking the car to bits hopefully this will clean up and be ok powdercoated as i didnt get this in the bundle of stuff and thats about where im at, so not far! have also removed the downpipe which was a right pita as could not get the cat off so took some time rithing around on the floor trying to manouvre it out! Quote Share this post Link to post Share on other sites
A5 VRX 0 Posted October 9, 2014 Very nice mk2!! And a VRT in the future, good set of motors! What size Comps are they (17x7.5?) What size tyres are you running on them? Adam Quote Share this post Link to post Share on other sites
Tigerfish 10 Posted October 9, 2014 Good start on the strip down. I'd stick some rags down the inlet holes though before something gets dropped in there :) Quote Share this post Link to post Share on other sites
