Jim 2 Posted August 23, 2013 Indeed! :) I've dropped him an email to draw attention to the thread. Quote Share this post Link to post Share on other sites
Jim Bowen 1 Posted August 23, 2013 Am sure we could work out some brackets if need be, i have CAD and an A1 printer. Can't see the design being rocket science. Quote Share this post Link to post Share on other sites
Stonejag 10 Posted August 23, 2013 Yeah - presumably the CAD work was done by Dave aka CrazyDave on here then as he was the other partner in DG Autotech. Perhaps worth dropping him a PM :) He might give you the original cad files. Or I could buy one of the sets I was offered and let you lot sort it out among yourselves ;) I have enough half-finished Corrado projects as it is...! Quote Share this post Link to post Share on other sites
Jim Bowen 1 Posted August 23, 2013 I could probably drawn it up from a photo if the photo was square on and i had one dimension Quote Share this post Link to post Share on other sites
daves16v 1 Posted August 23, 2013 Sounds like you've all got it sorted but if you struggle I can help out. Quote Share this post Link to post Share on other sites
Kevin Bacon 5 Posted August 23, 2013 Chaps - before you start copying DG Autotech's work, it might be worth dropping them a line to see if they mind first! They may not make them any more and therefore might not care, but if they are still selling them, they might not be too impressed at people copying their products! LOL, it's a piece of cut aluminium sheet without a copyright or patent, so legally people can copy it if they like. What ever is left of DGA have made it clear they're not interested in this community anymore, so erm, so what? Quote Share this post Link to post Share on other sites
Sean_Jaymo 0 Posted August 23, 2013 What happened to DGA? Weren't they quite a big thing on here? Quote Share this post Link to post Share on other sites
CrazyDave 0 Posted August 23, 2013 I have two sets of the brackets in the picture (on the 1st page).... £20 + postage if anybody wants them. No plans to do any more TBH and no plans to design anything else for the Corrado if people are just going to rip stuff off all the time. A real good way to kill off any good will in people..... Quote Share this post Link to post Share on other sites
seanl82 23 Posted August 23, 2013 Dave, I'm sure there was never any intention to rip anyone off. Someone was asking after them and was informed they were no longer available, so others offered to help make them using a copy. Someone else then said maybe you'd have the CAD drawings. I don't know you myself as I wasn't around when you were a forum regular, and I'm sure thats the same in most cases here and quite a few got very enthusiastic at the idea, myself included. If you still had the drawings and were willing to make a run, I'm sure there would be quite a few takers. :shrug: Quote Share this post Link to post Share on other sites
fla 9 Posted August 23, 2013 I have two sets of the brackets in the picture (on the 1st page).... £20 + postage if anybody wants them. No plans to do any more TBH and no plans to design anything else for the Corrado if people are just going to rip stuff off all the time. A real good way to kill off any good will in people..... Hi Dave, as per Sean's comments above there was no intention to rip you off at all or kill off any good will. I for one (indeed like many others) have certainly appreciated your technical input on the forum in the past, perhaps a shame that you're not so actively involved now. Again, no insult to you or your work was intended. Quote Share this post Link to post Share on other sites
Jim Bowen 1 Posted August 23, 2013 I was going to go on dragons den with the idea. Quote Share this post Link to post Share on other sites
Sean_Jaymo 0 Posted August 23, 2013 I'll give you f*** all in return for 45% of your house! Quote Share this post Link to post Share on other sites
Stonejag 10 Posted August 29, 2013 Right, so now I have a set of bracketry and one fan (the other's in the post) :) Just trying to make sure I have all the hardware I need now - what holds the bracket on the passenger side? The mounting holes are much bigger than the others, is there a feature on the radiator that they fit around or do I just need some big washers? Also do the smaller mounting bolts go all the way through the radiator or is there a thinner flange around the edge? Can't see a thing on mine as it's still attached to the car... Cheers, Nick Quote Share this post Link to post Share on other sites
Stonejag 10 Posted August 30, 2013 Tip for anybody thinking of fitting these: Spal 11" fans fit the large mount but you need a 6.5" Spal for the smaller one. Kenlowe call that size 6" but the mounting holes are in the same places (on a 135mm square). It looks like an 8" Soak will fit but the mounts are about 3mm out. I bought the wrong size for the smaller fan so will just be running the single 11" fan - I can always revisit it if need be. Frustrating but maybe it'll stop someone else making the same mistake! The 11" shifts a bell of a lot of air given that it only draws around 6.5A at 12V do it'll most likely be fine without the smaller one :) I bought my fans from Serck (http://www.serckservicesmotorsport.co.uk) and was very impressed with the price, speed of delivery and customer service :thumbleft: Stone Quote Share this post Link to post Share on other sites
ovens 0 Posted August 31, 2013 Hi Dave if you still have the bracket, i will take them. I have two sets of the brackets in the picture (on the 1st page).... £20 + postage if anybody wants them. No plans to do any more TBH and no plans to design anything else for the Corrado if people are just going to rip stuff off all the time. A real good way to kill off any good will in people..... Quote Share this post Link to post Share on other sites
ovens 0 Posted September 2, 2013 I'm also looking for fan bracket if any are going Quote Share this post Link to post Share on other sites
matt59876 0 Posted February 24, 2014 I have two sets of the brackets in the picture (on the 1st page).... £20 + postage if anybody wants them. No plans to do any more TBH and no plans to design anything else for the Corrado if people are just going to rip stuff off all the time. A real good way to kill off any good will in people..... Dave, Do you still have any of these brackets? Quote Share this post Link to post Share on other sites
