Cressa 44 Posted June 23, 2020 So from my box of many parts I have found the piece pictured. Rubber one side, then suede/brushed the other, like a door window trim It is straight and I didn't label it up, doh! Schoolboy error Answers on a postcard please 😊 Quote Share this post Link to post Share on other sites
Keyo 47 Posted June 23, 2020 Looks like the top part of the inner window scraper that sits on top of the door card. Quote Share this post Link to post Share on other sites
seanl82 23 Posted June 23, 2020 10 minutes ago, Keyo said: Looks like the top part of the inner window scraper that sits on top of the door card. 👍 Quote Share this post Link to post Share on other sites
Cressa 44 Posted June 24, 2020 Any pictures... I cant work it out !! 🤔😂 Quote Share this post Link to post Share on other sites
Cressa 44 Posted June 24, 2020 It is definitely not 17 32 or 33 as they are rigid !! I got it from somewhere... Quote Share this post Link to post Share on other sites
1xshaunx1 27 Posted June 25, 2020 10 hours ago, Cressa said: It is definitely not 17 32 or 33 as they are rigid !! I got it from somewhere... I have a blind doe. Quote Share this post Link to post Share on other sites
seanl82 23 Posted June 25, 2020 11 hours ago, Cressa said: Any pictures... I cant work it out !! 🤔😂 If no one can help in the mean time, I'm taking my door card off again later next week so I'll get some photos. I'm sure it's from around that area somewhere..... Quote Share this post Link to post Share on other sites
Keyo 47 Posted June 25, 2020 (edited) Just incase it is 32 and 33 this is how they work slotting in together. The top border strip that sits on top of the door card- its not uncommon to see them ripped off from an untrained person destroying them to remove the door card when in fact you can just leave them be. . Edited June 25, 2020 by Keyo Quote Share this post Link to post Share on other sites
Cressa 44 Posted June 25, 2020 Cheers for those pictures. I did fit those two pieces that are very rigid. This that I have is super flexible. Bendy bendy like a door seal.. Quote Share this post Link to post Share on other sites
Cressa 44 Posted June 25, 2020 4 hours ago, 1xshaunx1 said: I have a blind doe. She'll go well with my no idea 😂🤣😂 ya twat. I had to think about that one 🙄🤣 Quote Share this post Link to post Share on other sites
seanl82 23 Posted June 25, 2020 That's it Cressa. It slots into 33. Quote Share this post Link to post Share on other sites
Cressa 44 Posted June 25, 2020 (edited) The penny drops...... I understand now. I'm hoping this is the drivers that i haven't fitted the yet !!! Superb, Gents thanks for that Edited June 25, 2020 by Cressa Quote Share this post Link to post Share on other sites
fendervg 32 Posted June 25, 2020 That's what I had it pegged as - there should be a number of metal clips, maybe 4 or 5 that help hold them together and grip the upper lip of the door card - no. 9 in the parts diagram above. Quote Share this post Link to post Share on other sites
Cressa 44 Posted June 27, 2020 (edited) GOOD AND BAD UPDATE So the passenger door scraper does have this fitted, thankfully, as it is now all fitted. Just checked the drivers part and that has it fitted too !!! This item is very very similar to what fits in the inner window scraper but is also shorter. Now I definitely took it from somewhere.... so my quest continues. Thank you very much for everyone's help so far 😇😁 Edited June 27, 2020 by Cressa Forgot the pics.... Quote Share this post Link to post Share on other sites
fla 9 Posted June 27, 2020 sorry to digress, but is there any solution to worn flocking on this piece? I was thinking of using some Tesa loom tape but i guess this would wear through in no time.. Quote Share this post Link to post Share on other sites
Cressa 44 Posted June 30, 2020 On 6/27/2020 at 1:07 PM, fla said: sorry to digress, but is there any solution to worn flocking on this piece? I was thinking of using some Tesa loom tape but i guess this would wear through in no time.. Cant help with that one, sorry Quote Share this post Link to post Share on other sites
Cressa 44 Posted June 30, 2020 So I was looking at this bloody part again tonight...👀 and wondered, should something else fit vertically in the door on the lock side then going down into the door maybe, somehow !!! sodding thing Quote Share this post Link to post Share on other sites
1xshaunx1 27 Posted July 1, 2020 21 hours ago, Cressa said: So I was looking at this bloody part again tonight...👀 and wondered, should something else fit vertically in the door on the lock side then going down into the door maybe, somehow !!! sodding thing I’ll pop round at the weekend if you want and you can look at mine n see if we can work it out. Quote Share this post Link to post Share on other sites
Cressa 44 Posted July 1, 2020 1 hour ago, 1xshaunx1 said: I’ll pop round at the weekend if you want and you can look at mine n see if we can work it out. Two heads are better than one, cheers Quote Share this post Link to post Share on other sites
