waynos
-
Content Count
881 -
Joined
Everything posted by waynos
-
Are they early or late buddy? If u got an early passenger side im interested. Otherwise ill need two late ones for each side
-
Will consider having a set of late wings also
-
Right im back on the search for another passenger side wing.early. Last two i got have been crap so i need a RUST AND DENT FREE one. Nearer london the better Cheers
-
you can make some brackets that protrude through the grille. did it on mine but i have since gone off the smoothed bumper
-
To The Top
-
up
-
hi guys i need a dent and rust free wing (early) for passenger side :)
-
Blimey you got a lot of work on your hands there, i remember seeing this at ultimate dubs last year and thought it was mint! You going for the same colour?
-
congrats on the rado purchse! as for the speedo you may need a new speed sensor (situated on top of the gearbox, i think it is a 22mm spanner needed to undo it)
-
Do you have any pics at all mate?
-
i think your a bit too far away from me mate, i should have said nearer london the better cheers though :)
-
Does anyone have any of the above parts? not bothered what colour and i dont need any of the windows or trim. Must be dent free though, dont mind scratches. Not sure if i need a late or early wing, cant really tell the difference. It will be going on a j reg g60 Let me know people, Ideally need these parts for the beginning of april as thats when the car will be coming off the road to be sorted
-
Im looking at getting some replacement brake pads for the corrado. Found a place on the bay that does rear brembo pads. There are two types one has a thickness of 15.2mm and the other is 17.2. For some reason the thicker ones are cheaper. Which ones do i need? They are going on a g60 by the way
-
Spotted a dark coloured vr6 on the m25 at around 6.45 must have come off at j11 or 12. What do u have under that bonnet? Sounded like satan chewin on a wasp! You popped a nice little flame as well. Made my day!
-
Yea my poppers were meant to be stainless too, ive acid etch primed them then gave them a coat of matt black. Had a bump in mine on nye! Bumper and wing are ruined. Was never 100 percent happy with the finish on mine so when it gets a bit hotter its coming off the road and im gunna redo it myself. Yours shall be my inspiration!
-
wow it looks stunning!!! wish my paint was half as good!
-
nice nice! what wheels are those? is that colour from a mk4? i reckon it would look even better with a standard bumper on it but i suppose that one allows plenty air to get to the intercooler
-
bumpage
-
im after a passenger side wing (early) can be any colour but needs to be rust and dent free. Nearer london the better , let me know what you got
-
you will have to trace the wires back to the ecu and splice into the corrado loom. Ill have a look for the wiring diagram over the weekend for you
-
i personally wouldnt put daz through my cooling system! however i have heard of people using a dishwasher to clean out the expansion tank
-
looking very nice! cant wait to see the finished article. On the look out for a vr myself now
-
I need to get a new battery for the 20 vt ( was a g60) What spec of battery should i go for? I would like to get something a bit beefier if possible. Also can anyone recommend any good makes?
-
i had mk4 seats in my rado. in my opinioin id choose something else. Width wise they are fine but the fram needs chopping about as on the mk4 the runners are at different heights and also the rails will need to be brought in. The floor will need to be chopped around aswell to allow the mk4 bracket to be bolted to it. After all that you will still have problems with the headrest hitting the ceiling when you try and tilt the seat forward
-
cocks, smear some dog poop or chilli pepper on it for next time they try! obviously means you will have to use gloves to get in your boot lol . Do you have an alarm? id park it somewhere you can see it or in a well lit place