BigTartanJudge

Having a small clear-out of some things, all parts plus postage Corrado rear strut brace SOLD Sports polyurethane steering wheel and momo-type boss suitable for 16V/G60 and poss MK3/VR6, note, couple of bolts securing wheel to boss have rounded out so would need drilled out and replaced, no horn push included, inserts have been sprayed black £25 FK LIGHTS SOLD G60 centre console with custom gauge holder SOLD 16V/G60 indicator and MFA stalks SOLD G60 clocks SOLD Pair of Corrado standard door handles, £20 each Touring-car gearknob, blue-anodised, few marks, £5 SWG Motorsport G60 twin-inlet kit, brand-new and unfitted, complete and with fitting instructions, cost £245 delivered £210 Standard G60 airbox, intact with newish panel filter fitted, £25 SALE PENDING G60 standard alloys 15", SOLD Set of four Borbet C 7.5 x 17" et30, 4 x 100PCD alloys, refurbed in dark grey, a few small rub marks as the refurbisher did not send them back properly protected...easily touched-in, fitted with brand-new generic 205/40-R17 tyres all round, also have a set of brand-new Borbet centre-caps in metallic silver worth £40 which I will include in sale. SOLD ETA BETA turbo-twist split-rims, 8 x 17" ET52.5, 5 x 130 PCD, polished outers, silver grey centres, plain centre-caps (might have another set kicking around), rare wheels, a little kerbing on one wheel and need a good clean, wheels have tyres fitted, but they are pretty worn on inside edges tbh, also have a set of four FK alloy adapters (4x100PCD to 5x130PCD), brand-new and boxed, never fitted SOLD Set of five e30 BMW BBS RZ 7 x 15" et24, 4x100PCD wheels, just fully refurbished at cost of £285 plus postage, diamond-cut and polished outers with matt-black centres/centre-rings and hex nuts, polished bolt in valves, new genuine BBS carbon-look/silver centre caps and full-set of 12 x e30 (60 degree taper) BMW standard wheel bolts and 4 x e30 (60 degree taper) BMW locking wheel bolts. £450 Set of hand-polished Porsche centre-caps, hand-detailed coloured crests, 75 mm puter face diameter SOLD Set of Bosch Lime Green Top Injectors 440cc, Bosch part number 0280150558 12ohm impedance, £225 plus postage (cost £300+VAT and postage) SOLD Fully hand-polished original Corrado jack, ideal for show-car £30 Payment for all items by paypal (providing you pay fee's or send funds as a gift) or bank transfer. I work away from home a lot, so postage may be delayed. Oh and excuse the bit of paper in a lot of the pics, rather annoying ed38 rules.....

Been an age since this was last updated, hopefully have some more pics soon, the final push is on....watch this space :-)

Saw and paid for a set of 5-door MK3 Anniversary seatbelts on Tues, was promised next day delivery, i.e. Wed. They have charged my card. Called them 3 times yesterday afternoon to ask why no delivery yet / check if been dispatched etc. and for tracking number, promised to call me back. Nothing. Called them at least 30 times today between 10 am and 6pm and they just ignore the calls. Not happy.

Good day, Has anyone on here ever had dealings with a breakers called Allparts 2010 based in Willenhall, West Midlands ? Am having real difficulty contacting them over some parts them still have not delivered but have taken payment for Any info appreciated, Cheers

Is it possible still to buy one of the carbon-fibre rear spoilers ?

Did VW ever make an Oettinger edition 16V ? One being sold on Pistonheads just now: http://www.pistonheads.com/sales/2528417.htm

Cheers for the offer, think this is sorted now for sure this time, will await delivery :)

Ok, thought I had this sorted but turns out it was the wrong type :confused4: Therefore, I still need one of these ASAP. Cheers

As per title, am looking for a late sunroof motor, must be in fully functioning condition. Cash waiting. PM me if you have one available, Cheers

One for sale here (not mine). It is a BBM RSR outlet, but it is a reasonable price and it is new, Cheers and HTH

I have some info on this subject if peeps are interested :)

Will see if they touch me when I will go Turbo :) I thought you were selling off all your turbo kit stuff though ?

Awesome motor, enjoy it and don't let it kill you :)

Old engine has now been sold on finally, freeing up more funds for further work. Here's some more recent pics: Also, looking for opinions on the front grille set-up, options are colour-coded Rieger, colour-coded debadged 3-slat or black debadged 3-slat.

Looking good 8) Like the US-spec Nugget G60 as well, I take it that it's LHD ?

Good choice mate for a daily, have been thinking about one of these too 8)

Andy, I will probably have a gear-surround and number-plate panel (if it comes off undamaged) soon but prob not till early Jan ? If that's any good to you, let me know, Cheers, Struan

Nice, they look in pretty good nick already though ? Were they from the forum ? The contrast between the black and beige will be great :D

Payment for my copy sent, thanks again :D

Interesting, If that is the dimensions for the Genny Profile 5, then they are identical to that of the Profile 4 Ultra, i.e. it would therefore 100 % fit my Audioscape amp-rack without any need for modifcation. :| Profile 5: Dimensions: 450 x 38 x 217mm Profile 4: Dimensions: 450 x 38 x 217 mm Apparently the Profile four Ultra is longer than then Profile four.....oops, my bad, should have made it clear I had an Ultra :brickwall: But any any case, you all seem to reckon the best idea is to ditch the rear 6 x 4's completely anyways, so I would probs be best off selling the two spare mono amps I have, making some cash and sticking with the Profile 4 ? :? It must be a pretty recent thing then, Genny going bust ? Damn shame :(

Thought this might be the case about needing an amp with more channels. I would need to sell the 3 amps I have though to fund a Profile five at £500 ! :confused4: Abdul, where did you get the info about Genesis going under as their website etc. is still live etc ? How come you reckon ditching the rear speakers is the way to go ? Would there be any harm in me running the rear speakers off the head-unit therefore leaving the 4 channels on the Profile 4 (two to run the two front speakers and bridge two remaining channels to run the sub ?) bristolbaron, could you possibly do me a favour and see if you can measure the length and breadth of your profile five ? I need to see if it will fit into the Audioscape amp-rack that I have, but I suspect it may be made specifically for the Profile four, although I guess it could be modified / made larger and then retrimmed :scratch:

If you need a set of 5x114.3PCD adapters (custom not FK), I can get a set of these for about £150 mate, let me know if interested and will sort out details Is that for all four? if so Ill bite your hand off now if you can get them to me in 7 days!!! :nuts: Yes for a set of four, whether they could be done in 7 days especially with bad weather and Xmas approaching, I'm not sure but I will ask the question and put you in touch with the guy, Cheers

If you need a set of 5x114.3PCD adapters (custom not FK), I can get a set of these for about £150 mate, let me know if interested and will sort out details

He's changed his hubs to 5x100's. Might want to advoid adapters for offset reasons? :shrug: Aye, but if his hubs are 5x100, to run 5x112PCD wheels, he will still need to run adapters to fit wheels ? :wink: I have a couple of jap-fitment wheels too and they are all have offsets of between ET35 and ET40, so running 5x100 to 5x114.3PCD adapters would be no problem and would avoid any need to weld and redrill wheels at all :)

Why you welding and redrilling the wheels ? You can get 5x100 to 5x114.3PCD adapters mate ? Seems a bit pointless having them welded and redrilled to 5x112PCD when you then need to run 5x100 - 5x112PCD adapters to then run them ?