gibber
-
Content Count
767 -
Joined
Everything posted by gibber
-
I would change your oil and filter for the correct items before I fear the worst!
-
Just be glad that u saw it happen
-
G60Dan, nice vid, could of done with a close up on the girlie! The in car bit reminded me of the Hazard perseption part of the driving test, I found myself click the mouse coming up to the juction haha
-
I have a full RHD kit for my LHD golf. It includes, full wiring looms, for the full car inc doors, power steering rack and pipes, steering colum, dash inc all heater pipes, abs pipework, brake servo, carpets. On the golf mk3/4 cabio the front bulk head bolts out, to swap between LHD and RHD. Its a huge job, thats why I havent and wont be doing my golf!
-
3 hours taking it easy, not a hard job just time consuming. 50 quid an hour :shock:
-
Im right near the centre.
-
A couple of bits off wood half way up the ramps to make um longer works for me, or jack it up and put it on stands or slide the ramps under. Helps only round the corner if you need it, from sunnier Wigan!
-
All you need to do is drill out the old bit thats left, put the new one in place and plunging a hot soldering iron through it should do the trick.
-
Thats for the extra power of the VR, and why the G60 dont need them.............as gibber turns and runs away for his flame suit again! :onfire:
-
They arnt pop rivets, all mine have been melted on in the 2 positions. I would say to do a good job you would have to remove the bumper.
-
Audi/Passat 5x112 Hub Front/Rear Connversion???
gibber replied to markcorrado1's topic in Drivetrain
:shocked!: :luvlove: 8) -
Not had that one yet Kev, sounds like fun to fix! :lol: :wink:
-
The only thing about dropping it so low it the rear wheel will look at bit funny as it will not sit in the centre of the arch, would sit about 2 inch forward. A couple of other problems you will have are the rear axle hitting the body work, and also the drive shafts hitting the body work. Your sump will sit very close to the floor, closer than you would think. I have all these problems. 8)
-
I sence a glitch in the Matrix! :wink: *mod edit - I've deleted the multiple posts above now - Matrix glitch resolved... ;) - Henny *
-
Saw this car on Sunday, it looks even better in the flesh! One thing tho that red VW badge on the rear need to go!
-
Here is you engine support: http://www.machinemart.co.uk/product.as ... 2050&g=107
-
I got sick ov beening on hold for over 20 mins wen ringing HIC, currently with Adrian flux as they gave me a cheaper quote and had no problems all year.
-
Now I have got my flame suit on. I have got bonnet vents, and raised the rear of the bonnet and mine runs at around 90° and my oil is usually just over 100° As well as having an opened up grill and bumper.
-
Buy a new book???
-
:mad: A bit late in the day now I know, but if you need any alarm stuff I can help, my father owns a big alarm company!
-
Is that Jan and ians club? whats happening?
-
It only does it fow a few minutes when its cold tho?
-
Buying a corrado and throwing a 20VT in it for less than 3k. think you would be very hard pushed!
-
Dubsport have created an almost 500hp 4x4 Rado VR!!!!!
gibber replied to g60Dazzaman's topic in General Car Chat
I mite let you kick my ass down the strip again. -
I swaped the temp senders and it is still the same. Im going to check the idle switch on the TB 2mora, but any more ideas anyone???