Jump to content

Stone0311

Subscriber
 View Profile  See their activity

  • Content Count

    435

  • Joined

  • Last visited

Posts posted by Stone0311

  3. Posted

    Hi All,

    Weighing up trying to restore mine or just source another early passenger front wing, if anyone has one around let me know.

    There's a few on flebay but would rather give money to someone here 👍

  4. Posted

    Reaching the end of the shopping list of parts, but still a few outstanding if anyone has any around:

    • 357 711 188 A - Shifter Balance Weight
    • 191 199 322 A - Body Balance Weight
    • 037 133 231 D - G60 Inlet Manifold Support Bracket

    Thx

  7. Posted

    Thanks Dox, ive got the square nut - it's the rectangular bush in the end of the cable that I need.
    Although it's doesn't look like mine had the balance weight so will be looking for one of them also

    Sent using Tapatalk

  9. Posted

    The only pic I have is from thier website below (part also in diagram with green arrow)
    Also missing this bolt from the shifter tower if anyone has one - some odd pitch m7 thread from what I can tell (orange arrow) 8ce9bc16358fa74f9afdc474244079ad.jpgac13f83c589d3880d4e958d22f344a27.jpg

    Sent using Tapatalk

  11. Posted

    Hi All,

    Looking at sourcing replacement bushes for my 02a gearbox selector arrangement - in particular I'm after the square bush for the cable end to selector.

    Struggling to find many sources if anyone has any suggestions?

    Used dieselgeek for these parts in the past but will no longer ship small orders to the UK due to the new vat rules, to justify the shipping could run a sort of group buy if anyone else wanted bushes or thier super slider for the shifter mech?

     

    https://dieselgeek.com/search?type=product&q=Corrado*

     

     

    Sent using Tapatalk

     

     

  14. Posted

    Hi All,

    Hoping someone can assist - trying to track down the 2parts highlighted on the attached; I may have them but not sure what they look like?

    If anyone has a photo or could take one that would be appreciated 5113cd72862b3cda033f440900f690ec.jpg

     

    Sent using Tapatalk

     

     

  15. Posted · Edited by Stone0311

    Hi All,

    Trying to clear some space so emptied some boxes, parts below to go - ive tried to gauge price but its not easy; let me know if im miles off. Thx

    Prices + P&P, can supply photos if required - just let me know

    Lowring Springs 35/40mm    Circa 3k mi, paint peeling - can pcoat     £25.00

    G60 Air Box Top    535 129 607A    £30.00

    K&N Panel filter for G60/16v with recharge kit        £30.00

    16V Radiator, Cowl and Fan (2k mi, 5yrs old)    OEM Equiv rad    £125.00

    16v / G60 Rear Engine Mount    357 199 354    £30.00

    OEM Front Shocks (Monroe)        £40.00

    16V Inlet Manifold Lower Section        £35.00

    G60 Charger Belt Tensioner        £40.00

    Shifter Bracket    357 711 789 B    £10.00

    VR6 Front Engine Mount    1H0 199 273D    £40.00

    16V PSteering Reservoir with bracket    191 422 371 C, 535 422 845    £30.00

    16V PSteering Reservoir  Polished Stainless Cover     Custom    £20.00

    Debadged 3Bar Grill        £25.00

    16V Caliper Carrier        £25.00

    Early Arch liner (Driver Side)        £10.00

  19. Posted

    Yeah, went with mocal rubber same diameter as stock all the way through. Most of the studs on the floor pan that take the fuel line clips were dying/dead so I swapped them out and welded 6mm stud; hose clips are for hydraulic hose but work lovely

     

    Sent using Tapatalk

     

     

     

     

  21. Posted

    Hi, looking for a few photos of pipework/wiring arrangement in the engine bay either side of the head if anyone has any, trying to follow stock layout where possible Thx

     

    Sent using Tapatalk

     

     

  22. Posted

    Hi all, update on progress over the last few mnths:
    Fuel pump assy mounted
    New fuel lines run
    New brake lines run incl new compensator
    Tunnel heat sheild fitted, exhaust installed
    Front discs changed for drilled/grooved to match rear with EBC red stuff pads
    Front subframe re-removed and pcoated due to issues with the finish, wish bones re-repainted also
    Battery relocated to boot

    b7f77777e2605b29aaf55b96132ccdb6.jpg1fa79d830c673726455fc1f954b34e57.jpgbc94ac07bbd86fafdcf5d67069619f84.jpg757c6b8fcf875812719d3287d49af073.jpg2bf65eb5d467e185f9593f745f0173f0.jpg552a3d5e57dba76bfd4d3204da8a8d7b.jpg89f6daf03ccaf8229fbcc735bb1bd00a.jpg

    Sent using Tapatalk

×
×
  • Create New...