VEEDUBBED

I might have a pair left over, later on i'll pop down and see, if they are still there i'll get you a couple of photos.

Right then gimps, VEEDUBBED'S done it again, always finding obscure stuff for our carriges. 1 set of late style fog lamps and indicators, not perfect but not crap either for 20+ year old components 1 fog has a tiny pock on the glass and one of the indicators has a couple of cracks. £140, i've seen these buggers go for £170+.. 1x foglamp glass (drivers side) and 2 good condition inner reflectors £50. 1x Vr6 ABV 2.9 original Bosch airflow meter and air filter top bit. £60. 1x '92 version foglamp/indicator, no damage and reflector good. £70. 1x Vr6 2.9 starter motor of 19.000km engine. £40 1x fuel injector rail with injectors and fpr. £50 If you need anymore photos just give me a shout.

Hello, I've got a fair few turbo bits left over, what do you need exactly?

Wow, Australia..i' m based in Rome, Italy and i thought i was far away! Right, the rear Windows are indeed all in one pièce and getting the buggers out isn't easy..i cut out about 7/8 of them years back when scrapping a few but unfortunatly i only have one Left spare. I'll get in touch with a car breaker mate of mine and see if he has one of the only corrados Left in Rome and ask How much he wants For them. Cheers.

Quick heads up For Nick aka Stonejag, goods delivered without problems, goods as described and the postage was exactly what he said it would be. Prehaps a certain seanfordrod should have done likewise.. I never forget getting done over.

Rome, Italy mate. I'll check the number and let you Know.

I'm sure i've got a few left over in good nick,i'll check and let you know. Send me your email and i'll get you a few photos.

Right, I've got a few remaining bits off a 19.000km '92 ABV Vr6 2.9 mill left up for grabs. Distributer complete with rotor,cap and leads £70 Ecu £80 Downpipe £50 Pistons and rods, no rings though. £ 80 sump and oil pump £60 Flywheel, a bit rusty £20 Crankshaft £80 Block £80 Inlet manifold, upper and lower bits £60 Injectors and rail and fpr. £ 70 Crankshaft pulley £ 20 Chances of finding comonents off an ultra low milage vr is gonna be quite slim my dear chimps Sooo get your wonga out and buyyyy. 2.0 9A 16v exhaust manifold and down pipe and center silencer, all off a corrado that tood 10 years in a lock up and had 66.000km. £60 2nd series foglamps and indicators, 1 foglamp has a small chip on the glass. £150 I'll unearth a few more bits over the weekend..

Does your 'raddo have A/C? I've got the top one and probably the rest, also the metal pipe that's not great but still usable. Send me your email and i'll send a few photos.

I'll have a look later on, i've Got a box of valver/g60 bolts.

Allrite my christmas stuffed chums, I have'nt touched a digifant equipped g60 in about 10 years now, i've forgot a Great deal.. Whilst timing the engine, after adopting the special procedure and obtaining the famous 28/30 degrees advance, when you re- reconnect up the blue temp sender and recheck the timing at idle, what would one see? 6 degrees or something else? In other words, would the ecu, after coming out of learning mode, revert back to 6 degrees at idle. I Know, sounds like a noob question but i just can't rememeber..

Best wishes to all you lot...MERRY XMAS!!!!!!!!!!!!!!!!!!!!!!

I think i may have a complete set-up left over, i'll check and let you know later on. How much of a hurry are you in?

Go on then Stone, i'll grab this as a spare, PayPal details mate.

Let me check and see tomorrow down in a box of bits, i think i saw one lurking..

Over to you hibbs, my one's different.

Thanks Ian, That's the one.

That must be the newer, rounder version,right? I'll have a look fo ya tonite.

Yeah, that's the bugger, i must have throw out at least two.

Right chimpys, This time i'm in a spot of bother and need a specific component.. I need that dam metal joiner pipe the connects the coolant hose to radiator, it's got a small 10mm bolt that secures it onto the front engne mount. Fuk all available here and not even Vw classic parts can help.. Let me know if anyone has 1. Ta.

Heat wrap the oil feed line..better still, try making it out of solid copper pipe or metal. When pushing a turboed 16v mill the turbo sometimes glows red hot and the heat rises.. When i do turbos i run the feed along the bulk head just to avoid this. If you can't or don't want to redo it, at least wrap the oil line with reflective heat tape. And while your at it, pop over here to Rome and redo my 3" exhaust..awsome welding done there. Def. look into fitting a restrictor if it's a BB catridge'd turbo and a big oil cooler, Lancia delta integrale ones are great or any other make, seeing as the turbo's only oil cooled.

Interesting kev, i'll inform him.

Rebuilt loads of 'raddo headlamos chimps.. First off, don't even attempt to remove the plastic beam adjusters, you could litrally just flick the buggers and they'crumble. Spray wd40 onto the orings then try and remove them, don't turn the sods the wrong way, they WILL break.. I find the best way of getting them out is by removing the lens then flicking off the plastic holder that snaps into the reflector lens, that way you can then soak the fekkers from both sides. I have no idea what kind of plastic was used but god if it's $hit.

100%??? You sure? wow, that's quite a difference.. Mate of mine in the states has a golf vr 2.8 AAA mill, he wants to fit a complete ABV inlet set-up off my spare engine. Is it just a simple bolt on job, swap one for another?

Allright chimps, Who know's if the ABV vr6's throttle body is bigger than the 2.8 AAA's version?? I seem to recal the 2.9's was bigger but i don't remember.. Cheers.