bix

Wow, very good work, looks great! Loving the dash! I think he'd say the same about ur back box Bally :lol:

Cool, know who to ask to get me a lysholm then :)

I wouldnt bother buying metal pipework for the stock intercooler, unless you definitely aint upgrading to a fmic!

Maybe the mfa is wrong? Are you having performance issues? Would run like a bag of shyt with that boost, like 1.2 nova stylee! Other than that I think that little boost has to be caused by a leak!

Me too, about 15 times, seriously cool now.... :)

Get a tin of black light laquer! the mk 2 is still rotting away , gutted really you got any closer pics of them mate they could be what im after. chaz

Think theres nearly 10 in this thread interested! How much you reckon you can do them for?

Get a tin of black light laquer!

Most places will check it for free anyway, and if its out, then yea you gonna have to pay 50 notes to get it done...doubt the camber will need doing too tho, so you'll prolly get it done for 20 notes, just depends what they took off to get the driveshaft out, easiest way is undo the 3 bolts in the wishbone balljoint, which have slotted holes so would affect the alignment if not put back in the same place. If the camber is out, I'd take it back to the garage that did the cv boots, cuz there is no reason to undo the camber adjusting bolts!

Think your speedo is a little wrong, mine does 116mph @ 6170 rpm in 4th, had it upto like 120mph in 4th, and that must be nearly on the limiter! The seals leaking in the charger wont do much damage, its if the bearings go, or the small toothed belt breaks/strips, the charger just munches itself to bits(lots of little ones that get stuck in the pipes and ic!) Have a listen to it when its cold, using a screwdriver as a stethascope, I wouldnt be driving it if its making any knocking or strange noises!

LOL!

Very nice, Ill have one too!

5mpg :)

Yea lol, doesnt even look like tinting spray, he prolly say you are bidding on a light bul cuz he want you to phone him up to buy them to avoid the ebay fees/hassle!

No the glass is smaller too

You need a new plastic part, most prolly warped, might aswell have changed it when you did the seal since they usually break putting them back on!

1H is the engine code, the head gasket is the same as that of the PG block, vw part b 037 103 383 L

Iv a schrick 268/276 idle isnt too bad at all, it is worse but nothing to worry about, did make it go a bit better, and definitely made the exhaust louder!

wtf is that meant to mean, the digi cam i used is a 3 mgp so it aint my fault Chill, was only joking, you need to use macro mode, or hold the camera further than 3 inches from the subject :?

I think you should take up photography, those pictures are great! :lol:

Mine stores codes?

Pull the light out and you'll see 2 screws!

Yeah cant be legal, Gav has some spare lenses for £25, dunno if the fogs/indicators will b ok tho?

Was near on £100 to get my tracking and camber done!

http://www.amonline.net.au/factsheets/cicada.htm