VR6Pete

£22.10 someone got themselves a bargain :D

Took me two months figure where it clipped on my ABS pump. Glad I'm not alone :)

Are you getting good pressure upto the fuel rail ? FPR ok, and replaced fuel filter? :)

I'll post up feeler thread on the vr6 oc

I would be interested in the schimmel 263 cams 110% if a group buy was going to be run.

:lol:

 

I think the best option has to be just avoiding the E38 show like the plague!

you should come to the VR6OC Billing weekend we are holding in August... always a good relaxed and entertaining weekend :)

---------- Post added at 3:15 PM ---------- Previous post was at 3:12 PM ----------

Here is the info:

http://www.vr6oc.com/e107_plugins/forum/forum_viewtopic.php?466973

If your interested, drop your name in the below thread:

http://www.vr6oc.com/e107_plugins/forum/forum_viewtopic.php?469432

Hope to see you there, hopefully i'll be in my Corrado too :)

You are a hero ... part ordered and will be in tomorrow!

 

Cheers,

Andy

No worries, its probably the most commonly asked question asked on VR6OC :) that and is my car OBD1 or OBD2 :)

its just your PCV valve, they are really common for splitting.

you can buy them from ford for a cheaper price than VW.

i beleive it was a part from the Galaxy VR6.

here is a good thread... http://www.vr6oc.com/e107_plugins/forum/forum_viewtopic.php?232789

ford part number: 7364573

Good idea Portent.

It's a sorry state of affairs with edition 38, the last time I went there were muppets, and lots of reports of items being stolen from tents, damage to cars, and some poor girl had a glass bottle thrown at her head and ended up in A&E, further more when they eventaully got back they had found there tend has been robbed of items, what was even worse is that the threads quickly get removed from the E38 forum and appear to brush over the problem!

If any event I organised as part of the VR6OC even ended up like that I simply wouldnt run the events :)

just my thoughts though :)

Great read :) learn something new every day!

theres no a week that goes by where I'm not reaching for my can of WD-40 owning a corrado :)

Its really sad seeing threads like this :(

when i bought my corrado, and i admit was cheap as chips and probably not far from getting scrapped due the amount of work needed doing to it, i put a lot of time and effort into bringing it back to its former glory. theres still more to do on the bodywork and possibly more welding but that wont put me off. although has taken 3 years to be in a position where im happy to put it back on the road :)

Im watching this on ebay as i do need a front badge so dont be ending it early and give everyone a fair crack of the whip :D

I think there was a thread on here of a guy who did it, made up a tool for it but still made a mess of the pillar.. im sure someone else mentioned you might be able to pack something with a washer to lift it up a little?

My mate fabricated them up. The hope is that more can be made up now trial fit was a success.

possibly interested in the ashtray one.... will let you know if my current bulb is knackered.

got mine from here. just over £115 for a Hella radiator, really good quality and fit.

http://www.radiatorshop.net/categories/corrado

Nitromores will fetch that off. But if vapour blasting after will loo really well.

Last jobs before MOT, fitted new stainless straps, went on a treat. Just need clean up the mounting point on the left and apply some rust prevention where the under seal wasn't covering up, also filed off some of the lugs in the HT lead guides so they now fit properly and finished tidying / wrapping my obd2 loom install.

Really happy with the straps. The old ones were very badly corroded.

Pete

I'm 85 miles away from Vince. I'm simply getting my tracking done and taking it steady.

Ill also be getting a few other things done while I'm there too :-)

Can't wait for the drive home.

Here's the link: http://www.stealthracing.co.uk/4wheel.php

Stealth racing have the laser alignment / geometry setup. That's where I'm taking mine :)

How much for the cams on their own?

Same happened to me. If you ground for too long it will keep going until it pops out the plastic bit in the clocks. Simple fix, a very basic component though by looks of things :)

Cracking idea Dave! I might have to give it ago... What did you use to bond it to the original bolster?

Not seen anywhere around here who does foam like that. Any chance you could pick me some up and post? I'd happily cover any cost.