Jump to content

trevor

Members
  • Content Count

    98
  • Joined

Everything posted by trevor

  1. i just got my strut brace from strutbracer and i have to say im not happy at all it took weeeeeeeeks to turn up and doesnt fit . . well pissed off i won't be using them at alll ever . . .
  2. trevor

    20v turbo

    please help . . does any one know what the pipe on the top of the throttle body does . what does it run to and can i block it of and run with out it . . .
  3. trevor

    20v turbo

    i've been out on the lathe and have just finished (for tonight) on a new oil cap for the 20v
  4. trevor

    20v turbo

    a little bigger now?
  5. i think you have to remove the balance weight from the old and put it on the new one any way it does sound like the old one fitted is to long . .
  6. i did pay for one of struttbracer . about 3 weeks ago now . still waiting . just had one email . waiting for a reply to question of a delivery date ??
  7. trevor

    20v turbo

    engine is comming on now . .
  8. trevor

    20v turbo

    finally got the intercooler . i will get on with fitting it this week . can not wait to take it out running boost . :lol:
  9. job done . . did you cut the back of your hand . . i always manage to spank my hand doing things like that . fu888n hertz too
  10. trevor

    288mm disks

    the caliper is the same . think the carrier is different . you can use the caliper and change the carrier to make them in to 312 tt /golf brakes . trip to halford and look in the disc/ brake book should help you out .
  11. trevor

    20v turbo

    if you get the chip done . which is by far the best way to fit the 20v . you won't need the rack and key .it out fo a octavia vrs . but its got a good lock transponder and key . if you go on the vw caddy forum and talk to a1 he has parts for 20v engines .
  12. heat is the way mate but its going to be well hard to get it hot . sorry its not much help but i will be watching the thread to see how you get on . . good luck
  13. trevor

    20v turbo

    try this http://www.amdtechnik.com / /
  14. you can get better cutting paste than tcut its not that strong . but it is very easy to cut them to far back if you was to use wet and dry . 1000 grit with lots of water but not for long .
  15. you could make it in to a clock for the garage or in to a table for the home . . :)
  16. tut tut . wire brush it a drill will and can burn / melt the ali . as you now know . you may have to cut it well back with fine wet and dry .
  17. trevor

    20v turbo

    i have a rack if its in the lock . . yours for free . . or i paid 365 for amd to chip and remove the imo from the ecu . . . 225 bhp . .
  18. trevor

    DDI dials

    how would you go about getting the picture of the dials that good that you could print it off on to the el ???
  19. http://www.strutbracer.co.uk/productSpage.htm found this one . . thanks for all the help . . . :)
  20. please any one have a brace fitted ?? at all ??
  21. simple question but does the mk2golf strut brace fit onto a corrado ??? does any one have a brace fitted ?? can you please post photo and info i need to get one quick quick
  22. trevor

    20v turbo

    its getting closer now just waiting for the new bumper . so that i can fit the inter cooler to it . i've taken it out round the back for a drive it was ok but until the cooler is fitted it was not runing any boost . got a list of things still to do as long as my arm . i've made a new engine cover . really can't wait to drive it on the road . drivin a car with a atb diff is different i can tell its going to be quick and fun to drive . :lol:
  23. i got a cover you can have but its got a cracked glass . . . . you can fit the ring to this cover but you still have the problem of the glue on the glass ??
  24. does it have dig readout of the milage ??? is the glue on the glass at all ??
  25. tip only strip them back if you really need to . . if you do . . nitro morse them back to ali sand them ,fill,and get them repainted with 2 pac by a pro . will be worth the cost . and you get a very hard paint finish .
×
×
  • Create New...