CazzaVR

2.0 16v late shell in good condition. Flash Red. Available in the next 3-4 weeks. Includes: Front subframe Rear beam Brakes Windscreen (perfect) Rear quarter glass 15" 5-spoke alloys + a few other bits and bobs Perfect for a project or for someone to cut up for repair panels. Pics soon. Will need a trailer! £200 ono

I might have an old one in the garage you can have FOC- I'll have a look later for you. Remind me if I forget! ;)

Whole thing AFAIK :(

As above- gasflowing works really well on a valver. KR cam is a no-brainer.

Should think it's a bit lumpy?

http://www.google.co.uk/search?hl=en&q=pcv+valve+vr6&bav=on.2,or.r_gc.r_pw.r_qf.,cf.osb&biw=1280&bih=603&wrapid=tlif133873477045310&um=1&ie=UTF-8&tbm=isch&source=og&sa=N&tab=wi&ei=v3jLT43yAone8QON5sH0Dw 2nd and 3rd pics ;) Better pic at bottom right on here: http://the-corrado.net/showthread.php?72441-Classic-Green-VR6-for-£2999-99-in-Dewsbury You can see where it attaches near the throttle body.

No worries Laurence.

Looks like you're missing the hose! There should be a thin hose that goes from the side of the head (near the PCV valve), onto the PCV valve and then on down under the intake pipework/MAF and onto the carbon canister pipework IIRC.

:brickwall:

Really liked Prometheus! Looked absolutely amazing, good performances etc. I definitely think it was over-edited though. It felt a bit rushed- needed more tension. Lots of little nods to Alien, but stood perfectly well as its own film. Liked the characters, but wanted to get to know them more. Really hope they do a director's cut. 78/100 Think all the questions were left open for a sequel ;)

It's yours matey- have replied to your pm :)

6 screws- two on either side at the bottom of the gauge surround (under the little covers), two in the top part of the gauge surround, two inside either side of the clocks (once the surround has been removed. The clocks sit in a kind of cradle. They have two 'pins' either side that they sit on. HTH!

Thanks Jake! Worked really well last year 8)

You can change it from above. Have done a fair few now- can be done in 30 mins! Just remove the cowling, set steering wheel to lowest position. The tiny screw is deliberately quite loose. Tap it round anti-clockwise from the side with a flat screwdriver and hammer. You may need to 'scratch' a line on the side of the screw so the screwdriver has something to grip into. Should come undone. If you have trouble, it can still be done from the top- you just have to find a screwdriver the right size, which you may need to bend like Jim says. Don't refit the screw- it clips in pretty firmly anyway, so just use a cable tie.

Jay, I'll have a set please.

Jim, sorry you got stuck in traffic :( Will post pics up when I've got them. Would be good to get as many pics as possible!

Bet the torque is a bit savage! How does it handle? ---------- Post added at 7:10 PM ---------- Previous post was at 7:09 PM ---------- Gonna fit a Cupra intake? Everyone on Briskoda does this- sees some good results.

Luuuuuuuuush! 8)

:( Dunno what to suggest mate. Would standard seats make any difference? I've always found them more supportive than Recaros. Might be worth trying a standard driver's seat for a while?

Thanks Karl, will have a look. Chris, I like them! Colours should go well with the Storm 8) I'm after BBS dust caps, not centre caps! :lol:

Thanks mate. Starting to have second thoughts about this...

I've had several V-TECS including a 5th Gen 2.2 Prelude and a 1.8 VTI (same basic engine as the DC2 IIRC). They're excellent, but very different to a Rado in every respect. Wouldn't want one long-term. I always went back to a Rado. Also think the DC2 looks very dated now. Have you driven it? Give it a good drive, then drive the VR straight away afterwards. Think carefully about which you could actually live with.

Kev, what sort of rpm does it sit at, say at 80mph?

Amazing what a difference new foam makes- looks excellent. Looked good with it totally removed too 8)

Niiiice! Love the car mats. It's the Imperial sticker in the back window that's won me over. Star Wars FTW!