chaos3oe

pm sent

Got one of these, £25 inc postage?

gone i'm afraid.

Andy it's straight, but a bit of corrosion on the inner edge of the lip on the rear edge is rough and a bit jagged. ---------- Post added at 10:31 PM ---------- Previous post was at 10:30 PM ----------

Do you mean the trans tunnel part of the shell, if so yes nothing has been chopped out yet. If you mean the plastic interior trim piece it's gone sorry

AFAIK the only thing you need to tell DVLA is the new engine number if you change that. Unless of course you change to a different wheel pan axle type, but then you'd be modifying the body anyway making it irrelevant.

These regs have been in place since the 70's, there is a points system you have to stay within. If you drop out of this you lose the registration number and have to have an SVA and you get a Q plate. Most people have been uninformed or just ignored them. One most worrying is a monocoque vehicle must have an original unmodified shell, how many 4wd conversions have Q plates? Even clearancing bulkheads/inner arches for engine swaps or bigger rims fails it, as does fitting a cable change box in a MK1 or MK2 Golf. Lots of info on the ACE website http://www.the-ace.org.uk . Lots of other stuff worth reading which could spell the end of our hobby but no one seems interested..........

If anyone is interested in any body panels, shout up. The remains are going for scrap metal shortly, tailgate, doors bonnet and front wings still available and cheap. Collection only from Barrow-in-Furness. cheers

Here are pics of the wheel i've got. Has a couple of tiny marks towards the left of the horn push, and a little scuffing on the rear of the rim just above centre both visible in the pics other than that it's pretty much mint, nice and solid no loose stitching. I want £60 for it, postage is £10 (24hr courier). thanks

I've got one from my VR6 original leather, good condition i'll get a couple of pictures of it on later.

Mark mean't to message you yesterday, if you mean the little plastic clip which slides into the slot on the strip and pushes down onto the stud on the roof I have one. Still got your address i'll pop it in the post for you. cheers

pm'd

I have a known good late one I can let you have for £15 posted.

You can get an original through VW Heritage as well.

PM'd

Heres a picture. I'll do it you for £20 including postage, it'll have to go as a medium parcel now with the new post office rip off rates even though it weighs nothing.

I have a complete pipe from servo to inlet off a VR6 with the valve, quite a long length in total and several different angle bends if you wanted one to chop up?

I've got one, internal horn/pipe has been removed at some point otherwise good condition. £20 posted, I also have a brand new filter for it if you need one.

Sorry mate it's gone.

I have Jim, but I think i've sold the one you are after in your wanted thread, it's a 1HO part number think it's common to the MK3 Golf.

ive got a pair of bumpers can you explain exactly what cuts you need cheers

Sold already i'm afraid. thanks

I have this one, off a 94 VR. £10 can post at cost? cheers

£40 posted for the ISV and clutch slave. I'm afraid the throttle body is spoken for. thanks

Nick, sorry sold the clocks last night, not has chance to update yet. If it falls through i'll let you know.