Jump to content

jscVR6

Members
 View Profile  See their activity

  • Content Count

    152

  • Joined

  • Last visited

Everything posted by jscVR6

  1. jscVR6
    PM sent
  2. jscVR6
    GRUVEN RadNeck for VR6 & G60 USED Including seal and new stainless bolts. £50 delivered (these are £80 from Gruven by the time they get to your door)
  3. jscVR6
    NOLOGY Profire High Performance Ignition Coil Kit for G60, 16v, 8v etc. Replaces Stock Ignition Module/Coil Unit. High Current Ignition Module, High Voltage Capability. I believe John Mitchell uses one of these on his G6016v. BRAND NEW UNOPENED. £130 delivered (these are over £190 new)
  4. jscVR6

    Headliner trim clips

    jscVR6 replied to Summz's topic in Wanted

    These are available from VWHeritage.com, part no. 535867540, £0.47 each.
  5. jscVR6
    Yeah it's the mk2 one you need. There was one ended on ebay today, I was going to bid on it but it went for £180.
  6. jscVR6
    Try C&R for Goodridge braided hoses, always found them to be the cheapest, and they give you the option of having stainless steal fittings too. http://www.candrenterprises.co.uk/shop/goodridge-performance-brake-hoses/car-corrado50 I think you'll find the hoses to the brake fluid reservoir are dealer only.
  7. jscVR6

    Dual Pole Sender

    jscVR6 replied to ray_vr6's topic in Engine Bay

    I got mine from VW Heritage: http://www.vwheritage.com/vw_spares_Oil-press-sender-150psi-Gauge-6-9psi-switch-2-pin_act_shop.product_pID_90289_lang_EN_country_GB.htm
  8. jscVR6
    You should consider the stainless steel crack pipe available through Awesome GTi in the UK, very well made. I've got one to go on mine next week when I do a full cooling system rebuild. http://www.awesomegti.com/brand/42-draft-designs/42-draft-12v-vr6-ss-coolant-pipe-black
  9. jscVR6
    I've had the same problem the past couple of weeks, smell of coolant in traffic with the blower on. Mine turned out to be a very small water leak from the t-piece in the water hose above the exhaust dripping onto the exhaust.
  10. jscVR6
    Count me in for this, I've just added my name to the list.
  11. jscVR6
    Sold to somersetdub, cheers.
  12. jscVR6
    Hi somersetdub, the hoses are still available, pm sent.
  13. jscVR6
    These won't fit standard VR6 callipers, they are for use when fitting the larger 288 or 312 setup.
  14. jscVR6
    Goodridge stainless braided conversion hoses for use when fitting 288 or 312 front callipers - BRAND NEW unused. These hoses have all stainless steel fittings (not the usual zinc plated). Complete with 2 pairs of stainless banjo union bolts for both calliper thread types and 4 copper washers. Cost £56 plus carriage from C&R. £43 DELIVERED
  15. jscVR6
    It doesn't mention it's from a Corrado so assume it's all Golf 2.8 stuff.
  16. jscVR6
    sold to hendrikbmx
  17. jscVR6
    hendrikbmx pm sent Purple Tom i'll let you know if hendrikbmx doesn't take them
  18. jscVR6
    Goodridge stainless braided conversion hoses for use when fitting Golf Mk4 type rear callipers - BRAND NEW unused. These hoses have all stainless steel fittings (not the usual zinc plated). Complete with a pair of stainless banjo union bolts and 4 copper washers. Cost £56 plus carriage from C&R. £43 DELIVERED
  19. jscVR6
    Put me down for a set too please Dave
  20. jscVR6
    VW Heritage do them... http://www.vwheritage.com/vw_spares_Oil-press-sender-150psi-Gauge-6-9psi-switch-2-pin_act_shop.product_pID_90289_lang_EN_country_GB.htm
  21. jscVR6
    The radiator is the same for aircon vehicles. I think the Hella one seems to be well recommended by a few people on here, i'm running a Nissens one without any problems. The only problem you will have is that the aircon condenser fixes to the top lip of the original radiator, but none of the aftermarket rads have the lip, so you will have to improvise something.
  22. jscVR6
    I had exactly the same problem about 6 months after fitting TT wipers, mine was the wiper motor. Fitted a new VW one and it's been fine ever since. Was just over £100 tho with 10% discount so not cheap.
  23. jscVR6
    I've had the same trouble with mine, everything in the engine bay is covered in it. The only thing i've found so far that touches it is carb cleaner, but it still takes ages to remove.
  24. jscVR6
    That was my VR in the main arena, we got there just before 9 and that's where we were directed to park. Was a good day out, if a bit cold. Good variety of vehicles. Didn't take many pics but here's the few i did take...
  25. jscVR6
    I'm going in the C, will only be in the general car park tho
×
×
  • Create New...