Jump to content

Macdaddy

Members
  • Content Count

    536
  • Joined

Everything posted by Macdaddy

  1. Replaced the led behind the heated seat switch!
  2. A dilemma I had today, hate the stereo currently installed but do I look at something more oem or go balls out on a double din?
  3. Heat up and pull off, simple. Worst bit is removing the sticky foam underneath.
  4. Paintwork/respray bumpers, new exhaust, engine bay detailed, and if possible remove random underside bits for powder coating.
  5. Great thanks, will have a go
  6. As part of my bid to have the lighting inside the car fixed the speedo cluster, heater controls that no longer had bulbs. Searched the forum and noticed the heated seat switches should also illuminate and can be repaired, how do they come out though? Help appreciated before i break somthing.
  7. Replaced the speedo bulbs (two were missing!) Replaced heater control bulb I now have dashboard lights!
  8. Used this thread to just change the bulbs on my VR6, no need to remove the dials, they are sat right there as you remove the plastic screen. Great thread thats saved me a lot of swearing and snapped plastic!!!!!
  9. Thanks for the comments, we like the D90's but want RS's for the summer shows.
  10. Am I missing something? This sounds normal to me, my VR will sit at 70 when moving but when stood still naturally the temp rises and the fans kick in. Your electrical issues does sound like the alternators not doing its job. As suggested get it tested before it kills the battery too. Check the belts tight too.
  11. Have to have a think about this one, Its 230 miles and 4 hours each way!!!!
  12. Thanks, Had them diamond cut. Down in Preston, pretty much a light covering here but thicker across the hills.
  13. Well as this is the first time i've had snow since owning the Corrado thought i'd grab a couple of pictures on the way home from work this afternoon on my phone. Thought she handled well enough in the snow today, although not sure deep stuff would be great as it'd turn that splitter into a snow plough! Come on post up your Corrado snowy pics!
  14. +1 Are the matts in new condition? any pics of the Corrado ones? thanks
  15. Removed the engine plastics ready for the manifold and rocker removal at the weekend.
  16. I know its VERY late to be asking but any of you NW lot coming along to this: Starts at around 7pm, we'll be there in ours despite the crap weather!
  17. Macdaddy

    JJS Wheels

    Had both Mk4 and Mk5 R32's, both great cars! Sure you'll enjoy ownership!
  18. Great thanks, After the later one thanks Stuey
  19. Thanks Joe, it shows when I check the thread but clearly not for others.
  20. The bit shown by the red arrows.
  21. After the piece shown in the pic, mines snapped :bonk:
  22. I'll take it, pm me payment and postage cost. Thanks
  23. Either of you take £20? thats the price i missed out on ebay over the weekend.
  24. Ordered a new rocker cover gasket, rear wheel bearing and new fresh oem warning stickers for the engine bay!
  25. Silver Rado, Leyland, Preston around 5.30pm on an N plate! anyone here?
×
×
  • Create New...