MurdoMac

They are generally a love/hate kind of wheel, first pics I saw I didn't like them but after seeing a picture of them on a Corrado I just thought they looked so unique as oppose to the thousands of spoke this and spoke that wheels out there I decided they were the ones for me, it was only after that I discovered how rare they seem to be and especially in a 5x100. I think they make a unique/must have car look even more so :)

more in silver http://www.ebay.co.uk/itm/nothelle-clasic-4x100-vw-ford-vauxhall-not-bbs-ats-oz-/231065360714?pt=UK_CarParts_Acc_Wheels_tyres_Trims_Car_Rims_ET&hash=item35cc91994a still not 5x100 :(

Thanks that was a help.. the black spoiler does not have to come of but as you say the bolts in the metal strip do have to come out, so bumpers now of and 1 headlight out and with the hadlight out I managed to reach the top pipe and remove it and the bottom pipe looks doable without having to remove any more of the front end.

Well after trawling the site I decided to take the front end off and have hit a bump...I have removed the indicators/fogs and temp sensor removed the 4 17mmm bolts as discribed in other posts but the bumper doesn't seem to wand to come off, although it seems very loose, is there anything else holding it or is it just akward to remove? I managed to get the jack under the front lip spoiler so that is still on after reading that it was unnecessary to remove it.

So I decided to give the old girl some love and got a set of nice new blue silicon hose from Roose Motosport which I got round to install today. After the flushing/draining/flushing/draining and then cooling down I managed to remove all the old hoses and have put on most of the new ones. However I still have the two small squiggly oil cooler pipes left and was wondering what exactly is the best way to fit them, from undernieth? or does the front of the car need to come off? (someting I'd rather not have to do). I have jacks/axel stands so could get the front a good way up but am still not sure if the pipes can be accesed that way, any tips please :)

£125 ... does it come with the car attatched?

5x100 I would have had these in a heartbeat.

Are these kits still avalible?

The arse is back, getting it every couple of links at the moment.

Ok so from the posts so far Samcos would seem to be of variable quality, roose pipes have not been uesed enough to make an informed review, so anyone have expeience with Venair?

Had a water leak which I traced to the engine-heater matrix pipe which had split, it was a easy fix just cut it back and reattached it however on inspection some of the other pipes look like they need replacing and so am considering a full silicon set. Started looking but am getting comfused 1. is there any real difference between the various makes Samco/Verair ets 2. Just exactly how many pipes do I need, I thought 9 (VR6/Manual/OBDII leaves 1 not used)but some suppliers seem only to have 7 others 10, and 3.where is the best place to get them, thanks.

On a similar note, does any one have pics of gauges fitted in place of the ashtray/lighter? I wanted mount 3 in there but am having trouble finding a facia/surround any tips/advice welcome :)

Well it was bad news, good news and then some more bad news so she failed on a rear brake pipe :( but the garage said since i'd traveled so far they would make and fit it for me :) then somehow the plastic top radiator elbow got broken in such a way it was unrpairable so the poor girl is still at the MOT station.:( The plastic in the top elbow just seemed to disintigrate I think I had just leaned on it, to be honest i'm really glad it happened at a garage rather than falling apart at speed. The dealer was suitably unhelpful stating that the part was no longer avalible he then suggested I might consider buying a complete radiator because the elbow would probable come attatched I wasn't going to but as a matter of interest I asked how much was a new radiator and he replied 'oh they are no longer avalible either' sounded like a case of 'computer says no' lol Anyway I found the elbow + seal on ebay and have ordered it up and should be back on the road in a few days, with a new MOT :).

Hi, have paid but am not marked of yet, thanks.

Payment sent, thanks.

Fantastic, I would like one in black please, could you PM me your payment details and I'll get it sorted, thanks

PM Sent

http://www.youtube.com/watch?v=xbFU6w7q3dQ It's All Over Now - The Rolling Stones Heaven Knows I'm Miserable Now - The Smiths It's the End of the World as we Know it - REM

That's a Kenwood KSC-SW01 powered enclosed subwoofer, it's a plug 'n' play underseat model although it wouldn't go under my seats.

So spent the afternoon insalling a sub ... it's a perfect fit, leaving the boot still useable and sounds great, really improves the sound quality, all in all a very nice little unit .. chuffed.

I like these, could you PM me your postcode so I can get a delivery price, thanks.

Saw a nugget on the Inverness/Elgin road on Sunday I assume it was a G60 didn't see the number, I think there was 2 people in it, flashed but got only a surprised look :)

http://www.ict-gearknob.com/index.php?cat=c62_Corrado.html&XTCsid=7fe78a87599ff8dab08b7359fe07cbed

New additions over the weekend, I've always liked the look of these on the blackberry I think they suit the car and make the back end look clean and smart.

I'd be interested it the white speedlines if they are still up?