g60bv

ok. so last tuesday driving not to hard. and the chatger belts snapped. car went very quiet and slowed down. ran ok thou. pulled over. poohed myself a little. thought the crank bolt had snapped.. opened bonnet. tooth belt wrapped round in half. :cry: thought , drive home . forgot it also drove the water pump and alternator. water temp went to 120 ish- off scale norm 70 80. oil temp went to 105.- always low. norm 70 80.. stopped after 1.5 miles for 10mins to cool car off. home only 3 miles away. replaced belt next day. also had a look in engine. water bit low and obviously had boiler over a little. so i topped up. about 1L also noticed my dizzy bolt loose. fiddled withe dizzy and tightened. drove the car tonight. first time since. bit low on power. and loads of steam blueish smoke behind me. checked engine over, nothing spilling or out of place. removed oil filler cap. loads of steam. oh pooh. have i... a) warpped my head b) cracked a cylinder or c) and i hope it's this one. is the timing out creating low power and excess water in exhaust :roll: please be gentle . :cry: i suppose a pressure test would also be a good idea.

running too rich. either fueling prob or timing. depending on the spec of the car. std should have very light sooting not much.

erm g60's dont have vagcom. you'll have to do it the old fanshioned way.. check or replaced the coolent temps sensor check the knock sensor.- remove it and inspect for any damage on the lead. also check or change the lamda, and boost leaks. also check the exhaust. is it sooty or clean.?? if it has a leak b4 the lamda it will thinks its running lean and dump fuel in if it has the cam belt changed recently. check its position. very easy to be a few teeth out. and then check the timming with a light. think it's 8' btdc with the blue temp sensor disconnected.

MIKE HOW DID YOU GET ON WITH YOU C. ANY BETTER.?

is that little intercooler going to flow enough for a blown vr6.? looks a bit ... well ... weedy.

bobbins. absolutly no knocking or movement. been on for over 2 years never need replacing. i'll try and find some pics.

i've got a 600mm long 300mmhigh and 76mm thick. with 3" ins and outs at approx 45'. big and should just fit behind. in mint con

yep indeede.

i had the power flex ones. and melted them.

soon as. cant believe the old bearings. only changed 2 1/2 years ago. but absolutly shot. car feels so much better for it.

finally did this you will need vr6 cv joints and 5 stud hubs and bearing..

defo a e30 m3 factory rhd. one of 50. in grey. they use special quick steer racks. so you cant just dodge in a 325 one. i'm sure it had a plate in the bay with a number on it. ? oh well never will know. it was sold nearly 2 years ago.

my friend owned a bmw m3 e reg. rhd. only made 50. took him a year to get a steering rack when it broke. ! then sold it. wolly.

you can get the chain hangers from c&r enterprise. but expect to pay more than £3 .!

mines been flashing for nearly a year. i wanted a new clean tank. got one from ecp. flashed from new. D'oh

super.

will g60 drive shafts fit into vr6 cv joints. ? only im changing over to 5 stud. so i've got new vr6 cv joints and 5 stud hubs. bearings. i'm now thinking that if my g60 shafts wont fit the new cv's. i'll have to go get shafts. shafted.?

i fitted gsf ones and they lasted untill i put the car back on the floor. they just sank in and snapped. now i use the vr6 ones. i'm running koni coilovers. no probs. just get the kit, inc top plate . if in doute speak to steve at vw enterprise. number in mags.

jabba sport can do dyno tuning on there rolling road. costs but it will be sweet.

hay a white corrado. sweet. - me too. erm potentialy. bottom end bearings cam bearings. oil pump. -,may have cracked a cylinder.? good luck.

yeah g60's love the go go juice. don;t except more than 250 per fill up. motorway miles included : )

i think it the 240mm clutch as used in tt a3 seats etc. if you running serious grunt use the cupra TDI clutch. it'll hold over 350bhp and as much torque

Anyone? :( unlesss the box has been swapped over for a tdi box, checked the box codes. also perhaps the gearbox speed sensor is wrong for different?

if your looking to up-grade on the g60. look out for the ibitza cupra r kits. comes with brembo 4 pots 308mm discs and pads. kits go on ebay for 350 ish. fits straight on the g60 hubs. just need some hoses to fit. but you'll need at least 16" wheels and you'll need to check the et of the wheels to clear the 4 pots. or fit spacers. excellent bit of kit. i've been using mine for nearly 3 years. superb.

if the sns chips which are designed for the redtops 305cc. so if i'm running the motorsport greys which are 328cc. that may explain why it burns a bit rich.? g-man. do you guys have the facility to change the pulse rates on the chips.?