flusted
-
Content Count
2,755 -
Joined
Everything posted by flusted
-
but bosch dont expect you to stage 4 your charger and run smaller pulleys :wink:
-
Most people on here will say you need the isv to bleed off excess boost, fitting one of this prevents that. Im running without an isv with no probs. If your isv is prone to leaking when it shouldnt, you will lose boost
-
mounting number plate below below bumper
flusted replied to praise b the LOweReD's topic in Exterior
what size is that plate and what font? it looks spot on -
the reason the crank pulley can be out, is there is play in the mounting between the sprocket thats held on with the 19mm and the actuall crank pulley thats held on with the 4x allen bolts. Also dont think vw where very accuate with the markings of the crank puley anyway
-
was guna say the same, i read that the crank pulley is normally wrong
-
i used to have some, search colt society on google they are called rs intakes
-
surely if you run a near standard size pulley, it should be ok for 7000rpm?
-
narrowband gauges arent accurate enough to go by really, sounds ok
-
the vacuum on the top of it lifts the diaphragm doesnt it, then when it hits posiutive pressure, it shuts?
-
should do i think
-
99 wiper elay, 18 fuel pump i think?
-
doubt its a zorst cam as inlet as the numbers would be the same
-
defo kr, they have the cut outs on the bottom of lobes
-
agreed
-
i flowed my own manifold, easy enough but doesnt relly make much difference but its all gota help
-
im runnin red tops with 3bar
-
iwas guna say cam timing and ignition timing. when mine was out it hit 20psi on the gauge but was gutless.
-
i thought 7600
-
just keep the standard injection and chip it
-
G60 lightened fly wheel??? what you think??
flusted replied to iow_corrado_g60's topic in Engine Bay
it wiull benifit every engine -
was guna say the same, check throttle switches
-
it goes on the top starter motor bolt
-
if the ecu doesnt get the right voltage ie earth strap missing, then it goes into limp mode and does all sorts of things
-
You dont need an excuse to buy 1 of them just im skint
-
Got it off of here, its a good fit which is unusual for fibreglass