VEEDUBBED

When i'm rebirthed in the next life, i wanna be pops.. lucky bugger..

Righto, What's the max thickness of wheel spacer one can fit onto a corrado running 15" BBS RM's fitted with 205 /50 section boots? My major concern is when hitting a pothole or travelling 5 up that the tyre would shave itself on the wheelarch lip.. No choice if i fit bigger calipers under 15" wheels, only way is 15/20mm spacers. Thoughts pleeze.

I agree totally Has, get the buggers to refund you or replace the starter.. No worries, it's here if you need it mate.

It Sounds suspiciously like low fuel pressure or possibly a duff ecu coolant temp. Sensor. Difficult to diagnose a car over the net though.. Try changing the fuel filter first then check the pump's pressure at the fuel rail. Simple stuff first.

Have you got an App. Called Wattsup? I could send you over a short video Clip showing that it actually works..

Fla, i've still Got the starter off My 19.000km vr. Any good?

No problem, Always a pleasure to help!

A quick word of thanks goes to Troy aka Graphite for posting off A set of calipers that were packed very well, fast postage too! Definitely a pro seller!

Have the grille rubbers turned up yet??

The ecu does indeed have an earth return, I don't remember the exact wire but it'll have brown insulation. I haven't seen a 16v loom in 10 years since I last broke one.. As long as the car runs ok, starts etc I wouldn't worry.

Just looks like someone in the past has added on an Extra earth wire. I've had three corrados and dismantled loads and all the earths had brown insulation, not black, like the wire shown. Does everything work? Maybe at one point extra equipment was added on? Just remove it I the car has no issues.

Seems that the wrong wires have been fitted on the wrong sensors. The sensor at the back of the cylinder head, above the exhaust manifold is the oil temp. Sender that You check by using the onboard computer button MFA. The other sensor under the dist. Is the water temp. Sender for the instrument gauge. Just swap over the crossed wires and the gauge should work.

Which means that jammy git of easypops Is gonna nab it!! Why doesn't anything like this happen over hear to me??? Always ancient ****ters and over priced crap. DAM!

Wasn't my intension Jay, just to warn you of the possible consequences.. The cleaning is the least of the problem, it's actually getting them dried out afterwards that's the bugger. I've tried dunking them in hot, soapy water and then force drying them with compressed air, fine on the outer bits but thanks to the metal bulb cover (At least on the second series lamps) you cannot get to the center part of the light, the air will just force the water side to side.. Bent pipe cleaners could also work. Give it a go mate, nothing to loose 'cause if you do break a glass i have spare foglamps available!!

Basically like pig **** then, methane?

Risky, you could crack the Glass if heated too much, How Will you Know when they are too hot? The sealant sers Like concrete and very difficult to remove, both off the glass and worse still out of the actual housing and that's if you get the glass of in 1 piece.. The only sealant I ever use when replacing the lense is made by Sika, white marine sealant used on boats. Try it, you might be lucky and succeed.

Right, simple question that's been bugging me for years. Are Farts flammable? If I was to put a lighter up near the jacksy and let a off a mega fart Would I cause a flame?

Allright Spen, As you can see,dingle got his goods yesterday safe and sound. I've no doubt your parcel will turn up, be a bit difficult to loose it! Did you try the tracking number?

150 quid just to change two outer cv joint gators Jon???? Christ, i should be a millionaire by now! thieving gits.. Take the car back and demand a refund mate.

As luck would have it, i only have 2 passenger sides.. awful too.

Thanks guys, i'll always try and help everyone out. And so will Chris, another top notch horder!!

Looks very nice mate, good colour too. Get rid of that awful interwarmer for a start, lower temp. thermostat and fan switch next, then check the probably crusty ingector wiring harness.. fit a decent oil cooler in place of the original afterthought fitted by Vw, next it's time for a no-lag SNS eprom in the Digifart ecu. Whilst your in there change the g60 cogged timing belt too. If your stuck for bits there's a few of us on here to help you out. Enjoy it!!

I might have one left over mate, i'll check tomorrow.

I've got one but..i'm a bit more than an hour's drive away..

...looks like your gonna need a good, used pump. Available off VEEDUBBED!!!