VEEDUBBED

Hey Tony,

Is the long one off a g60 any good?

If i still have it i'll send you a few photos?

Cheers.

In this case, def. Get Jamo's block as it'll always cost more to send from Italy compared to Scotland..

Last things I sent down to Ireland were a vr6 cyl.head cat and foglamps for a couple of hundred €'s.

Well, I've got a spare PG G60 block that's yours for free.

Only problem is that i'm located a little further away.. as in Rome, Italy..

If you need it..

Don't know why i fukkin bother sometimes...

Send me your email and i'll send the photos by phone.

I may have the temp. sensor still attached to a spare few 9A heads i've got spare, i'll get you a couple of photos or the P/N.

The oring should be a normal version, or maybe the green rubber type, i'll check a spare dist. i've got and photo it mate.

Ok, i'll dig them out and put a few photos incase you can use them.

Cheers.

Carl, I haven't forgotten about your bits mate, just massively busy.. I'm sure I've got a spare hose on a g60 fuel rail down in the garage somewhere, don't know about condition though as the pipes are all 20+ years old now. I'll send you photos.

Are the BBS rm versions any good? I got a few.

Cheers.

Hi Gavin,

Send me Your email and i'll get you a few photos of some spare headlamps i have.

Cheers-Andrew.

PM sent.

What's wrong with the car?

Happy birthday mate, hope ypur having a great day!

Ok, no problem mate.

I found a few, have they got to be 100% perfect?

Send me your email and i'll send you a couple of photos

Right you lot,

Anyone know where the bloody part number for a 92 Vr subframe is stamped?

I've looked all over the dam thing but can't find it..

CHEERS!!

Thanks, i'll have a peek.

PM sent Dazz.

Anyone Know How to set the GALA function that sets the volume in accordance to road speed on an old gamma 3 Blaupunkt Corrado radio?

I need to Know How to get into the main menu and what button needs pushing as i don't have any instruction manual.

Thanks.

I did this same thing last year, no problem using that type of wire, just buy good quality wire and use the oil proof sheething available off ebay, good quality terminale and you'll be fine.

The only problems i ran into were trying to find some of the more obscure Vw terminals such as the headlamp connectors and fan spade connectors, also some of the big positive feeds into the fusebox were buggers to track down. Wiring suppliers in Derbyshire had almost all the stuff recquired though.

Daz, did you get My last Message?

Fit as in screw into the steering rack, yes they Will but the ZF arms are longer than the 16v TRW made rack.

The tyres could rub on the inner wings, afairc there was also a difference in the threaded part that screws into the rack, one part had a different profile end shoulder that buts up to the inner rack. I did this conversion from TRW to vr6 ZF rack 10+ years ago so my memory of every detail lacks a bit..

Hi, Def. Got a few, send me your email and I'll get you a few photos sent.

I'm based in Rome, Italy so I'm also a little nearer..

Cheers, Andrew.

Allrite all,

Need some quick help here guys, Can anyone kindly provide me with the part numbers for both RHD corrado headlamp lenses?

I've got different numbers and too many different lenses of Euro glasses and UK versions..

THANKS!!

I might have a pair left over, later on i'll pop down and see, if they are still there i'll get you a couple of photos.