VEEDUBBED

No chance matey, bugger crumbled as soon as i touched it.. In theory, one would have to destroy a headlight inorder to remove the bloody thing.. Don't think i can help you bud.

Gonna be a sod to find, as soon as you so much as fart near them they self distruct.. I normally just buy two spare electric motors and modify the headlamps so that i'll never have to worry about the dam things again. The motors can be bagged off ebay.de, you'll rarely find them elsewhere. They normally go for 40/50€ used, they're a great solution 'cos there's a manual turn knob on the back of the motor to adjust the beam hight. I'll see if maybe i have 1 lurking down in garage.

What do you want to know? Help me a bit too, what IHI turbo is fitted? Same goes for the other components, ecu type? Need mote info..

Hi, I've got loads of bits, having done a few turbo-16v engines in the past, what do you need? turbo? injectors? the list will go on and on mate...

PM sent Liv..

Yes, they do, you'll have to also change the plastic surrounds aswell.

..I'm always lurking mate..

Yep, got a set out of a 19.000km engine, only thing missing are the rings but I'd have bought them new regardless. Let me know if you need them. Cheers.

Andi, I'm in the same boat mate, haven't drove or moved my corrado since'08.. Also got a 1 and a half year old daughter.. Best of luck to you and you familiy!!!

Gold, have you sorted it out? Do you still need them?

Ah, ok I'm sure i can find you a few, broken and unbroken. I'll get back to you tomorrow, take some photos and send them. Can you give me your email?

That is most definaly broken mate, age old problem concerning the old, brittle plastic used. I normally just buy 2 electric motors off ebay.de and adapt them onto the headlamp's reflectors. If you do manage to remove some off doner headlamps,without the things crumbling, remember to spray some silicone spray onto the bayonet parts BEFORE trying to refit the buggers. I'll see if i have any spare motors.

I checked on the loom, it's been cut up..and there's no fan connector either..god knows what I did with both looms. Ask Chris (lilfuzzer), he's always got plenty of vr bits.

If you bought the loom, you'd get it free..sorry, couldn't resist.. I've actually never posted off something so small to the Uk before, no idea mate. Let me see if I still have one attached to the loom and I'll get back to you. When you tape up the wires use proper non sticky looming tape, preferably made by Tesa.

Right, I can see that the fan motor's plug has either melted or been damaged in some other way, looks bloody awful. I might have a spare one on my vr loom. The photo showing the damaged harness boot is gonna be a sod to repair, you'd have to practically remove every terminal and fit a new boot.. The last photo shows the actual wiring harness hanging down sans it's looming tape that probably disintegrated yonks ago, no loss really as the tape was total crap anyway.. Which reminds me.. I still have an entire engine loom of a low milage vr engine..the tapes as soft as it was 20+ years ago when it was new.

I've got a set of rear black leather seats with hump if your interested.

Follow the clutch cyilinder's feed line from the gearbox bell housing. Engine covers pop up on ebay from time to time, if not, plenty of folk on here have bits, try chris-lillfuzzer. Quite normal for spare wires to be found, even inside the actual loom itself! unless something is missing or has been detached.. Most of the plastic on these cars is getting quite brittle now, bonnet cable clips snap as soon as you look at the buggers, don't touch the headlamp adjuster's 3 pronged attachment that screws into the headlight.. foam under bonnet disintegrates, as does the foam present on the internal heater box flaps, the little foam cushions present on the interior wiring looms, door handles snapping, Aux. water pumps packing up,water pipes breaking..

PM sent.

If vag can't help I've got the cover off a low mileage engine, non coil pack version though.

Yep, got a pair, or entire lights if needs. Send me your email and I'll get you a few photos.

I've got a sump off a 19.000km vr engine, any good to you?

OR, send me your email and i'll post you a few photos of a few i have..

I've got a few mate, could you send me your email and i'll send you a photos. Cheers.

Which could cause the clutch not to release properly, and possibly knacker/overheat your clutch's release bearing prematurely..

It entails removing the gearbox and changing the fork. 50 Euro off eBay in Germany. Vr has a higher clamping load than the G60's pressure plate, whilst you in there maybe uprate yours with the vr's version.