W3RKD
-
Content Count
3,897 -
Joined
Everything posted by W3RKD
-
How has you car been set up then ? Sounds very odd to be doing what you describe. i think from the sounds of it the car hasn't been set up to accept the eprom correctly ie timing/fueling...
-
It should not open until the oil reach's 80deg if you went for a thermo take off plate
-
you have the correct idea about spacers.. they do exactlly what you describe to move the wheel futher out into the arch.
-
SLK32 AMG supercharger INSTALLED PICS!!!!!!!! last page!!!!!
W3RKD replied to potatonet's topic in Engine Bay
standard g60 map sensor is 2bar. so its good for 1bar of boost in standard form -
Does it actually stall or just feel like its being held back ?
-
We also Managed to find him a new Interior aswell...
-
I Had to let you Guys in on Furkans secret... These are his new wheels for his corrado... :lol: What Do You Think ?
-
That sealant will work fine.... what you need to do is. Assemble them but dont torque bolts just yet... now apply sealant then with finger (wet/soapy) run around bead to remove any air bubbles. Now torque to required setting and then once tight run finger around again to ensure perfect bead of sealant! let dry for 24hrs then refit tyre.
-
i would imagine this kind of car would be worth around the 2k mark nowdays. It might be worth selling the wheels seperatly as they will not be to everyones taste.
-
SLK32 AMG supercharger INSTALLED PICS!!!!!!!! last page!!!!!
W3RKD replied to potatonet's topic in Engine Bay
Have you got the unit yet ? -
you clear the data logged whilst its connected to your pc mate.. there is a clear log button to click.
-
Has the clutch been mis-aligned ? I would think this is the problem - Have you checked the gearbox mount is tight also ?
-
No problems any more questions about the LM1's dont hesitate to ask.
-
Steve - you can download all of the infomation you need from this page. http://www.innovatemotorsports.com/support.php
-
have you tried testing it using the timing light method ? there might be need need to spend £48.00
-
did you get this problem sorted ?
-
A6 Door Handle Conversion problem with boot and key
W3RKD replied to woody's topic in ICE 'n' Secure
all you have to do is inset a hidden terminal somwhere on the car to affix a 9v battery if you main goes flat this is enough power to activte the central locking and small enough to hide anywhere out of site. -
i think cartec do some simular ones also
-
i wouldn't recomend those tbh i would stick to some OEM Beru ones for reliabilty.
-
I had the stud conversion on my revolution wheels and they were very good
-
The advertised price on bbm site converts to £1537.79 you need to then add import tax - shipping and then Vat on top of that if you want it delivered. aprox £2419 delivered. Our prices incorperate all of the extra costs and should be very competative. HTH
-
yes thats the kit that we can supply with a price tag of $2649 not $1200
-
The kit you have seen is just a upgrade kit. intercooler etc
-
70% of the noise is gone with the silencer kit fitted. There not to loud with the std airbox's though but they can get a little annoying if you have a headache. :lol:
-
you can change everything that bolts onto the front subframe then for the rear just buy some vr6 disc's and new bearings. Aslong as you have the doner car for the front end conversion the rear will be no problems at all to convert to 5 stud HTH