Goldie

Coilovers Eibach anti roll bar The car does look nice in that picture and it is a shame it is too far gone. I bet you will have it for a another 5 years.

Yes Kip. It has been a while. Im hoping the manifold will be on this time next week as i am away with work for a couple of days. You are more than welcome to try the Nothelles on if you want. If he is i will try my best to be there. That G Werks open day was a long time ago. I actually got that Schrick from Gwerks, it was new and cost £700. How values change. N100VSR is a very nice car, i haven't seen it for real but have admired it for several years. What car were you in back then James? I have had a couple of people say that. I think i am going to leave the casting 'au naturale' and keep it looking that way. Thank you very much. The Comps were great.They were heavy though and the car drives much better on wheels i have had since.

The attraction for me is the rarity of the part. If i ever feels the need i can hook it all up. Yes mate, the TB was done complete. Aqua blasting doesn't damage any of it. I want to coat them in something. I painted all the parts last night with a high temp aluminium paint. I painted my standards manifold with it. For some reason it has come out very powdery so i have taken it all off and am back to the drawing board.

Unless you need to there is no point. You will end up with another.

You did. With the flap removed and blanked off it is just as normal. I don't want the wiring and vacuum items under the bonnet. Obviously all parts are being retained and tucked away. The kit consisted of manifold, 2 x plates, 1 VW motorsport electronic controller, vacuum reservoir, wiring, tubing and the Stealth mapped ECU.

Yes mate. The top one isn't being touched to preserve the original label. I have a reproduced one to go on the panel that will be fitted.

Here are the smaller parts fresh from being aqua blasted. I don't know whether to paint the panel and the manifold which i should have back on Friday. The finish of the panel is nice as is but it will oxidise. Anyone have any experience of looking after aluminium parts like this?

I had been looking for years. I had accepted that i would probably need to get a full car at some point. I knew Martin (Easypops) would be interested in the majority of the tasty parts so he has bought me out and now has the rest of the loot.

K plate cars have the early dash. Welcome and good luck in your search.

It fits in the archives mate. The one that is as original will be kept. The other one is being cleaned up tomorrow and will be bonded back onto the manifold. Those RSs came from a good place.....

The nothelles are lovely. The car sits so well on them. And yes they are TSW Venoms. 17 x 7, 5 x 100. Once refurbed they will be going on for a very 90s look.

Yes mate, the real thing. Interestingly the old one i had was different. It had a Pieburg script on the manifold itself and there was no plate. This one comes with the plate(s) but having taken it off it does not have Pieburg on the casting itself. I have read that the ones with the writing on are prototypes but i have no idea of how many have or haven't got any writing on. This one is complete. The vacuum reservoir isn't original. I believe it should come with a green spherical one. All other parts are there. The plan as per last time though is to blank of the actuator and run it is a normal manifold. I don't want the additional parts under the bonnet so they will be stored away. Here it is. Luckily it has an oversized throttle body on it. It is off to be aqua blasted today and then i will decide on its final finish. Here are a couple of other shots. Some are from a gathering at Lilfuzzers house. The current wheels are Audi speedlines from a TT. I still have the RSs, Nothelles and some proper marmite.

I haven't updated this in ages so here goes. The car has hardly moved in 3 years, around 1500 miles in all. I have kept my eye open for nice parts and recently i struck gold. I owned a VSR in 2013 but it wasn't complete so i sold it on and had my eye open for another since. As many will be aware a car came up that was damaged with one fitted so it had to be done. I contacted the Corrado wobble in Glasgow (Easypops) and shorty after the car (and me) were headed North. I think it is fair to say the result was great for both of us.

Im in as well please.

Is there a limit as to how big things can be? If not: Wings Number plate panels Front spoilers Dash inserts (air vents / radio etc housing)

The ones listed on eBay are awful. Good that the switches and trim parts are present but other than that no thank you..

I saw a white VR (i think) in Chesterfield last Sunday and i was overtaken by an L plate VR (blue) on the M74 just outside Glasgow last night..

I would say that good condition black cloth Recaro values aren't far from leather. They are both highly desirable.

Craftsman.. Attention to detail is amazing..

I don't know if this has been mentioned on here but clearly the forum is not the place it used to be. The majority of Corrado type reading is now on Facebook etc which has its merits. You can get more live feedback from people, it is easy to upload pictures etc. However there are no build threads anymore, you cannot do that easily on a facebook page. A lot of the pleasure i get from this community is following how people have developed their car and also being able to have a 'diary' of my own car. Does anyone else feel this may end up going full circle and eventually we may all return to posting on here.

Result. Those axle bush bolts should be 60Nm.

I know mate. I remember hanging off the tongue wrench. Maybe it is due to the components being painted. Same principle when you have wheels refurbed you should check the torque settings of the bolts after a while. Anyway, I'm just glad to get to the bottom of it and know all is ok. I enjoyed stopping the boot out, removing both rear interior panel trims, the back seats, both suspension legs along the way. Its all part of the fun. Bloody Corrados.

Fixed. Rear brake caliper to carrier bolts loose, hand tight passenger side and not much better drivers side. Both rear axle bushes not tight enough. I have checked and re-torqued every bolt. Lesson here is double check everything and then check it again.

I have checked the lower nut is torqued correctly so feel my hunt will be in the lower area of the suspension. Ill check the bushing on the coilover itself. Interestingly i cannot get the car to make the noise by pushing down on the boot lip and bouncing the suspension.

Darren, you know me too well. My dad very politely sat in the boot but nothing obvious from in there. The noise is audible outside the car so will resume the hunt underneath.