Jon_vr6

I think its just the bottom arm of the thermostat housing that needs to come off so you can then remove the old crack pipe!!

Take care when you are undoing the tiny screws that hold things on some of mine rounded off and they were an arse to get off!! And if your fitting a new crack pipe be prepared for a fight mine had corroded on and took a good hour to get off, had to dremmel the edge so the new one could fit in!!

Thanks to BIG Pants baby and AQUA G60 for the space saver and the locking wheel nuts

Great sellers

Jon

Are you sure they arent over inflated??

I used the bumper removal off the corrado club canada easy peasy 2 bolts on either side avoid the middle one

http://www.corrado-club.ca/

click on technical help and then bumper removal !!

Remember the rest is american so ignore some bits

Can anyone answer the question in the first post ??

Yeah your cars jelous of mine hehehe will someone tell Kate that its not her fault they can just go over time!!

wasnt me mate id be crying if it was the storm but it wasnt it was the girlfriends car (she doesnt take care of it hehe)

Typical go out for a drive with the girlfriend in her car and we get to buxton and a strange grinding noise from the front right wheel appears. We pull over at a petrol station thinking its a flat but all tyres were fine but still that grinding noise when we moved it. Decided on calling the AA and he tells us the driveshafts gone.

Its at a garage now ready for monday morning but the question is where have people found the best place to get a new driveshaft is?? VW??

Never knew they could just go like that!!

Jon

Apparently on another thread this is the set up

The thread is M12 x 1.5mm for 4 stud and M14 by 1.5mm for 5 (VR6)

What mm are they and fitment typr m10,m12 etc??

Right ive gone back to my standard alloys and im in the process of renewing the whole lot tyres, refurb and wheel bolts!

But where can i get new wheel bolts for my corrado vr6 solitudes?? VW?? if so part numbers? Price??

Many thanks

Jon

Im interested as im sure my GF would be so id be interested in 2 please!! IMO the easier the better plug and play with the oem connecters sounds best to me!!

Low temp thermostat also does wonders!!

BHP??

SCREW IT!! LOL!

This one??

http://uk.youtube.com/watch?v=55LLv09Rvpg

Its finally out for the spring yeah!! Looking mint as always mate!! Im thinking of putting the solitudes back on it after i get them refurbed sick and tired of the potholes in this country its a joke!! Then get it lowered in the next couple of months!!

Id be interested in the plug and play one as soon as they are available could you let us know on this thread PLZ!!

Whats the diode one he sells whats the difference between that and the normal one??

Should pull off in some way but dont quote me if it breaks!! :lol:

Sounds like either a fuse or the switch isnt connected correctly in some way!!

I have a mk2 one i think on mine got replaced with that as less chance of something snapping as in the late corrado ones!! There should be a that turns up and down next to the switch as you get in all cars to turn the brightness up or down!! Is it just the screens near the dials that arnt working or are they all not working eg. heater controls light??? If its just the dial ones then might be just the bulbs have gone!!

When i was doing mine i looked into buying that kit from MJauto and they wouldnt accept payment from anything but westenunion so bought mine through VW!! :D

No worries fella yeah see ya round! 8)