emu

I know I can drive for M.O.T but I didn't know I can drive to garage to do some work.

It's only my fault :( - Front wheels fitted on wrong side, left on right, right on left :epicfail: (already fixed) - Slight playing on rear n/s bearing - need tighten, can't understand because was checking everything 3 times and was fine, but after few miles driving wasn't :( (already fixed) - Slight playing on front n/s top mount - same problem as rear bearing (already fixed) - The worst, I've put my jack by mistake under rear brake regulator snapping bracket of the rear beam. It's need welding but due to not heaving tax and m.o.t can't go anywhere to weld it, my m.o.t station don't have a welder at all. Used welding glue which works very well on my exhaust bracket. I hope it works this time as well. As soon it pas I will get it welded properly.

Koni dump adjustable. There are eibach springs as fas as I can remember, some sort of standard high or max -20mm Nice one, do you have a link for the dampers or any idea how much they cost? Sorry for the thread hi jack but after owning cheap coilivers I've come to the conclusion your better off spending the money on a decent shock and spring setup and sacrifice height adjustment. Had adjustable Koni shocks on an old civic and they were incredible! Don't have a link. I only know they worth about 150 quid used but have no idea how much new. All what I can give You is picture of them. If You look in my vr6 in members gallery You will see them.

Everything was done for MOT so today checked everything one more time and found a problem :( N/S front wheel bearing had very little playing, probably it would be only advisory but replaced all rears and O/S front so decided to do this one as well. Problem is that MOT is on Wednesday and today is a bank holiday so everything is closed and I have no bearing to replace. Was in dealer but the didn't have any in stock but I can't wait till Thursday for order. I hope to get one tomorrow, if not I have to rebook my MOT as everything is dissembled and waiting for new bearing. This time I was prepared and had bearing separator in my tool collection.

New alloys. Keskin KT5 17 x 7.5. I've never like them to much but look quite nice. I needed some 17 alloys to check if I will manage to fit my future brakes so they are. Now need some coilovers Fitted my unbreakable bonnet release cable bracket. Did similar thing to my first Corrado more than 5 years ago and still works :)

MOT booked on Wednesday. Wish me luck :)

What do You mean engine ?? Just engine or with alternator, turbo etc.. ?? You need ecu and wiring loom, intercooler, lots of pipes, engine mounts etc. Probably I will be selling full set up from my corrado 20VT, just bolt on if You interested but price will around 2000-2500 quid, depends what You need.

Yep, and your grey MK3 as well.

Now I know why I haven't seen Your car today passing Your flat. It was surprising because this car always was there......

Koni dump adjustable. There are eibach springs as fas as I can remember, some sort of standard high or max -20mm

Fitted today new NGK Platinum plugs and Beru leads. Car runs on 6 cylinders without problem :) Last checks on Monday and car is ready for MOT :)

I had a cv joint pointed on my mot test and replaced it but there is still clicking. Its only on first gear so must be a gearbox. Could clicking gearbox be a reason of MOT failure ?? What I herd is that condition of Your engine and gearbox is not considered on MOT. Does anybody now the answer ?? I will be checking everything again on Monday because maybe I did something wrong but don't think so. I've booked my MOT on Wednesday and don't want to go there and find out that my VR6 will fail it again :( I have a plan to replace this gearbox but not now.

I have a JOM coilovers on my 20VT and they were fine for my until I have driven a Corrado with KW2 set up. Its a day/night difference. Jom - hard as suppose to be and that's all. Car is bouncing and handling not as was on KW. I have a Koni (not coilovers) suspension in my VR6 and is as good as KW but miles better then JOM or similar 200-300 pounds one. Car sticks to road on the corners as should not like on JOM's.

I've remember my S3 on GT28RS having close to 350 ps. It was a very scary fast car but Corrado always will be Corrado and I can't meet old lady driving it like I use to have met few times in Audi S3. Good luck. Best colour to buy :)

Shame :( New Beru on the way :)

No worries mate. I bought this car to get them back on the road in proper way. They weren't Beru or Bosch or VW for sure. They had some different signs on them but can't remember what but they were very rubbish. Maybe You paid for genuine one but somebody fitted some fakes for You. Anyway... Newer mind. I'm very happy about the car, and fixing it is a pleasure for me.

Must be some cheap replacement. Already in the bin where they belong :censored:

When I've started it yesterday wasn't working on all 6 cylinders, maybe 3-4 cylinders, so today decided to find out where the problem is. 5 of 6 leads going to coilpack were snapped. 2 of 6 leads going to engine were broken. Now need new leads and new spark plugs. Already ordered :) Because coilpack was almost brand new I managed to remove all broken pins out not braking coilpack what wasn't easy Fixed my exhaust mounting bracket using J-B cold weld glue. Hope it will do the job till new exhaust come.

6 hours in garage today end.... - front bearing done - CV joint done - both top mounts done Everything putted together and 4 wheels are finally on the ground :) To do - bonnet release cable - exhaust welding (that's a problem because will use some exhaust glue, just need to attach one hanger on) will be full Miltek in near future but it must be done for MOT Started car today and need to replace spark plugs and leads as not working on all cylinders. I've got brand new coil pack which will use if sparks and leads doesn't help.

20VT - started for about 30 minutes VR6 - replaced front wheel bearing

I can't get access as well

I like it. Specially in orange fast colour :)

I've sold my electric recaro front and back seat for 550 some time ago.

Perfect mate. Will try tomorrow when my girlfriend will be out home :)

Replaced my rear brakes and bearings :)