Harrier
-
Content Count
1,594 -
Joined
-
Last visited
-
Days Won
1
Everything posted by Harrier
-
Well I put a multimeter on the wheel speed sensors and the nsf showed nothing. Replaced it this afternoon and the light didn't go straight out which concerned me, but after a 2 mile drive switched engine off and upon restart the lamp went out :):):)
-
Nah ! e60 is V10, I guess its the newer model
-
Ooh nice, is that the e60 v10 ?
-
No reason for this post other than its my 1000th !! :)
-
So picked up a bulb from Maplins and soldered it in, now working :) Unfortunately it stays on all the time now :censored: Terrific !
-
Axle bushes,main axle long bolts & nuts,brake hoses x 4, brake pipe clips x 4, had to drill out the compensator bolts so them 2 + a few other nuts & bolts
-
To blast & powdercoat beam & brackets £60
-
Thankyou :)
-
It says entry from 9.30 so 9.00 meet ?
-
Actually used aerosol Hammerite on those, gives a good finish though. Wondering what to do with the calipers now, they don't look great compared to the rest, probably new would be ideal
-
Cadnam looks to be a good meeting point, looking at google maps there is a pub called the White Hart Sound ok ?
-
Having spent most of the week at the workshop I brought the car home this eve with a nicely refurbed rear beam,with new bushes, hoses, clips etc 8) Then spent an hour cleaning the body when I got home as the car was covered in dust from sitting in the workshop. Apart from a trip to Maplins tomorrow to get a bulb for the ABS lamp all ready for Beaulieu next weekend :)
-
Certainly will !
-
Oh feck it, i'm hol then :(
-
Think it was about £60
-
I unfortunately can't make Volksfest this year but very much hope to be at Santa Pod in August:)
-
My oil gets up to 110 at times , don't think it's a problem so long as it doesn't get any higher. Enjoy Volksfest!
-
Should only take you a day 8)
-
Impressive work ! Look forward to seeing what's next
-
I managed to get that part recently from VW , took a week or two though.
-
Taken advantage of a quietish week at work to drop out the rear beam for blasting, coating an re-bushing. Also dropped the exhaust system to clean along with the heat shields which will be blasted too. And a general spruce up under there 8)
-
I did something similar to mine! Nice to see you are back on the road :)
-
Thanks anyway Chris, lets hope it's just a bulb.
-
Thank you :thumbleft:
-
Ok, thanks for the advice :) Do you know what type of bulb I need ?