VEEDUBBED

I've only ever seen the Vr racks fitted with ZF manufactured steering racks mate, i have two spare Vr6 racks, both ZF.

Let me check down in the lock-up, i may have one to swap. Cheers-Andrew.

I think i may still have a complete set off a 19.000km bottom end. If you still need them, Send me youe email and i'll snap a few photos. Cheers-Andrew

Hi mate, I-ve got a -92 2.9 ABV Vr6 bottom end left over from a crashed corrado, way back in -92.. Been sitting since then and only had 19.000km-s.. I-ve got the block, crankshaft, pistons without rings, sump and a few other bits. Head was sold years ago. One slight snag, i'm in Rome though. If your interested, Let me know. cheers.

Hi Ben, You still need the elbow mate?

Forgot to mention that what i don't have, chris lillfuzzer probably has stashed somewhere..

Hi, What exactly do you need mate? my email:[email protected]

Sorry for the late reply Tom, busy with work.. The hoses are fine mate. Could you get a postage quote for posting the lot here to Rome, Italy? Thanks.

Hi storm, Any chance of posting up a photos of the shocks? Cheers.

Hi Tom, Photos would be great! My email is [email protected] Cheers.

I'll take them mate How do you want paying? PayPal ok? I'll cover the fees. Cheers-Andrew

Easypops and chris.. why am i not suprised.. God, you two buggers must have barns full of bloomin 'raddo bits!

I'll take the brand new Corrado sill strips Jon, would you accept £90? I take it that the glue backing should still be ok? Send me your PayPal details mate. Cheers-Andrew

Also spraying the lockring's threads with silicone spray is another way to avoid cross threading it.

EXCELLENT service provided by Micky.. Mega fast postage, goods exactly as described and very well packed.

Ok mick,all done mate. check your paypal account.

Hey micky, No problem bud, no hurry mate. The plastic trim bit is the one that sits behind the handle in your photo, it just slips on behind. Let me know how much you want for all the parts photoed mate, including the handbrake trim bit, if available. Cheers-Andrew.

Hi mate, A decent set of front fog/indicators and the handbrake trim plastic that slides onto the handbrake? cheers.

As title gents, mate of mine burst his fuel pot. P/N: 191 201 043F Cheers.

02A or 02M flanges? I can't remember which one is which now.. getting old.. I think i may have a few of both types left over amoungst bits, let me know what type.

Even if you manage t fit them, how are you gonna flip the seat to enter the back seats?

Hi, I've got an ultra low miles 2.9 ABV vr half engine left over. It's only run 19.000km's.. Only got the block, pistons, crank, sump rods etc as head was sold ages ago. Let me know if your interested. cheers-Andrew

The later shift tower bolts straight in to the older 02A boxes mate. Just make sure you get the matching bottom support for the shifter's shaft, the part that bolts onto the bottom of the gearbox housing with 'VW' embossed on it as two types were made, one type for a thinner shaft shifts and another had a larger diameter. You'll have to also get the reverse light switch off the mk4's tower too, they are different. Buy a VW polo aluminum gear lever housing as it bolts straight into your corrado's tunnel so no faffin around making up spacers and bodges to install the mk4 shifter housing.. I did this mod a couple of years back but i can't remember every detail though.. I did have a problem with the brand new Vw polo housing though, iirc a couple or the holes that secure the gearlever's securing plate weren't threaded, nothing major though. Cheers-Andrew

Yeah, sorry it was another member also from the states looking for the shifter.. Could you send me your email? I could then load up a few photos of the parts and send them off my phone, much easier.

Well, I do have what you need but I'm a wee bit further away.. If your keen, let me know mate.